636460
14
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
14 Operation instructions
6 720 812 418(2014/07)OR30 OT Thermostat
6 Operation instructions
OR30 room thermostat has the advantages of easy operation and practicality. The
function of it is operated by two key and a knob.
Fault reset: Press “UP” keys to reset if the fault code occurs.
Check CH/ DHW temperature: Press “Down” key to check the CH/ DHW
temperature, and then press “UP” key to exit.
Set target room temperature: Increase or decrease the room temperature by
rotating knob.
Set the target temperature of DHW: Press “DOWN” key twice to check DHW
temperature, then press “DOWN” and “UP” simultaneously to set the target
temperature of DHW. Adjust the target point by “DOWN” and “UP” key. Press
“DOWN” and “UP” once simultaneously to exit.
Temperature calibration: Press “DOWN” and “UP” simultaneously for 5s to start
temperature calibration. LCD shows battery icon, and calibrates the temperature
by “DOWN” and “UP” key. Press “DOWN” and “UP” simultaneously once to exit.
Default reset: Press “UP” key for 5s until LOD blinks.Press any key to exit.
The temperature displayed on thermostat is different from thermograph.The test
methods of thermograph and thermostat are different. In general conditions,
thermostat’s temperature sensor is more precise than thermograph. Due to the
difference of regions and environments thermostat has a slight deviation. If this
deviation is large (>5 °C), you can use “temperature calibration” to adjust (See
part 6.1).
6.1 Temperature calibration
Due to the regions and environments thermostat has a slight deviation. user can
adjust the temperature through “temperature calibration”.
Press up(P8) and down(P9) key together to enter temperature correction and
then the battery icon will flash up on the LCD.
Adjust the value by “up(P8)”and “down (P9)”key. If the temperature difference is
not very obvious, this function is not recommended.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch OR30 OT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info