Bedienungsanleitung Bosch PAS 12-27 (Seite 11 von 63) (Alle Sprachen)

544065

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

English | 11

Bosch Power Tools 1 609 92A 0PY | (9.7.14)

 When operating the vacuum cleaner in damp environ-

ments, use a residual current device (RCD). Using a re-

sidual current device (RCD) reduces the risk of an electric

shock.

 Connect the vacuum cleaner to a properly earthed

mains supply. The socket outlet and the extension cable

must have an operative protective conductor.

 Before each use, check the vacuum cleaner, cable and

plug. Do not use the vacuum cleaner when defects are

detected. Do not open the vacuum cleaner yourself and

have it repaired only by qualified personnel using orig-

inal spare parts. Damaged vacuum cleaner, cables and

plugs increase the risk of an electric shock.

 Do not drive over, crush or stretch the cable. Do not

pull the cable to unplug the plug from the socket outlet

or to move the vacuum cleaner. Damaged cables in-

crease the risk of an electric shock.

 Before maintaining or cleaning the vacuum cleaner,

making any adjustments, changing accessories or plac-

ing the vacuum cleaner aside, remove the plug from the

socket outlet. This safety measure prevents accidental

starting of the vacuum cleaner.

 Provide for good ventilation at the working place.

 Have the vacuum cleaner repaired only through quali-

fied specialists and only using original spare parts. This

ensures that the safety of your vacuum cleaner is main-

tained.

 Before restarting, check the proper condition of the

vacuum hose. When doing this, leave the vacuum hose

mounted to the vacuum cleaner to prevent dust from

coming out. Otherwise, you could possibly inhale dust.

 Do not use the vacuum cleaner as a seat. The vacuum

cleaner could become damaged.

 Use the mains cable and the vacuum hose carefully.

Other persons could be harmed.

 Do not clean the vacuum cleaner with a water jet point-

ed directly at it. The penetration of water into the vacuum

cleaner lid increases the risk of an electric shock.

Products sold in GB only: Your product is fitted with a

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Symbols

The following symbols could have a meaning for the use of

your vacuum cleaner. Please take note of the symbols and

their meaning. The correct interpretation of the symbols will

help you to use the vacuum cleaner in a better and safer man-

ner.

Product Description and Specifica-

tions

Intended Use

The vacuum cleaner is intended for vacuuming and extraction

of materials that are not hazardous to one’s health and for

non-flammable liquids. The vacuum cleaner is also suitable

for commercial use.

Use the vacuum cleaner only when you fully understand and

can perform all functions without limitation, or have received

appropriate instructions.

Product Features

The numbering of the product features refers to the illustra-

tion of the vacuum cleaner on the graphics page.

1 Cable holder

2 Carrying handle

3 Socket for power tool (PAS 12-27 F)

4 Latch of the vacuum cover

5 Container

6 Vacuum hose

7 Release button for hose connection piece

8 Hose connection piece

9 On/Off switch (PAS 11-21/PAS 12-27)

9 Mode selector switch (PAS 12-27 F)

10 Vacuum lid

11 Permanent filter

12 Float

13 Accessory holder

14 Dust bag

15 Plastic basket

Accessories shown or described are not part of the standard deliv-

ery scope of the product. A complete overview of accessories can

be found in our accessories program.

Noise Information

Sound emission values determined according to

EN 60335-2-69.

Typically the A-weighted sound pressure level of the vacuum

cleaner is 77 dB(A). Uncertainty K=3 dB.

The noise level when working can exceed 80 dB(A).

Wear hearing protection!

Symbol Meaning

Read all safety warn-

ings and all instruc-

tions before use the appliance. Failure to

follow the warnings and instructions may

result in electric shock, fire and/or serious

injury.

CAUTION

OBJ_BUCH-860-007.book Page 11 Wednesday, July 9, 2014 12:46 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PAS 12-27 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info