Bedienungsanleitung Bosch PBH200FRE (Seite 14 von 74) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

32131

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

English–4

1 609 929 F02 • (04.10) T

■ Place the machine on the nut/screw only

when it is switched off.

Auxiliary Handle (Fig. )

■ For safety reasons, the machine should be

used only with the auxiliary handle 14.

By rotating the auxiliary handle 14 to a comfortable po-

sition, a fatigue-free and therefore safe working posi-

tion can be achieved.

Loosen the winged screw 13 on the auxiliary handle

14. Swing the grip to a new position. Retighten the

winged screw.

Overload Clutch

If the insertion tool becomes caught or jammed, the

drive to the drill spindle is interrupted. As a result of the

forces that occur, always hold the machine firmly

with both hands and provide for a sure footing.

Depth Stop (Fig. )

With the depth stop 15, the drilling depth t can be set.

Press the button 12 and pull out the depth stop to the

tip of the drill. Read the value from the scale 22, sub-

tract the desired drilling depth t and set the resulting

value on the depth stop scale.

Dust Vacuuming/Vacuuming Attachment

■ Take protective measures when dust is pro-

duced while working that is detrimental to

health, combustible or explosive. For example:

Some dusts are considered to be carcinogenic. Use

dust/chip extraction and wear a protective mask.

■ Keep your workplace clean. Material mixtures

are especially dangerous. Light metal dust can

burn or explode.

The machine can be connected directly to the socket

of a Bosch all-purpose vacuum cleaner with remote

starting. The vacuum cleaner starts automatically

when the machine is switched on.

Mount the vacuuming attachment (optional accessory)

and connect the vacuum cleaner.

The vacuuming attachment is spring loaded up to the

preselected drilling depth. In this manner, the vacuum-

ing attachment head is always held close to the surface.

Setting the Speed (Fig. )

By increasing or decreasing the pressure on the on/off

switch 8, the speed can be continuously controlled

during operation.

Advantages:

– Slow starting of holes, e.g., on smooth surfaces or

tiles

– No sliding off of the drill when starting the hole

– No splintering of the hole.

Speed Pre-Selection (Fig. )

With the speed regulator 9, the required highest speed

can be pre-set.

As a result of this limitation, the on/off switch can be

pressed only to the pre-set highest speed.

The speed must be selected according to the operat-

ing mode, the material to be worked and the diameter

of the drill.

See Operating Modes for recommended values.

The operation of the gearbox for each application is

set with the mode selection switch 11:

Drilling Hammer Drilling

The operating mode selector switch may be ac-

tuated only at a standstill.

Do not use tools without SDS-plus for hammer

drilling or chiselling!

The following table shows how the operating mode

selector switch 11, the right/left rotation switch 10 as

well as the speed regulator 9 are to be set for the var-

ious operating modes (See fold-out page for figures):

■ Before any work on the machine itself, pull the

mains plug.

■ Always keep the machine and the ventilation slots

clean for proper and safe working.

Clean the tool holder daily.

Working Instructions (Fig. K–N)

Operating Modes (Fig. O–S)

Operating Mode Type PBH

160 RE/

180 RE/

1800 RE/

200 RE

200 FRE

Hammer drilling in

concrete or stone

Fig. Fig.

Drilling in steel or wood Fig. Fig.

Screw driving

Right rotation

Left rotation

Fig.

Chiselling only with MV 200

(optional accessory)

Fig. –

Maintenance and Cleaning

O O

P P

pbh160_bu_1609929F02_t.fm Seite 4 Dienstag, 5. Oktober 2004 11:25 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PBH200FRE Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PBH200FRE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info