Bedienungsanleitung Bosch PBH6B5B60N (Seite 9 von 12) (Englisch)

707890

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

en Cleaning and maintenance

2Cleaning and maintenance

Cl eani ng and mai nt enanc e

Cleaning

Once the appliance is cool, use a sponge to clean it

with soap and water.

After each use, clean the surface of the respective

burner parts once they have cooled down. If any

residue is left (baked-on food, drops of grease etc.),

however little, it will become stuck to the surface and

more difficult to remove later. The holes and grooves

must be clean for the flame to ignite properly.

The movement of some pans may leave metal residue

on the pan supports.

Clean the burners and pan supports using soapy water

and scrub with a non-wire brush.

If the pan supports are fitted with rubber rests, ensure

that these are also cleaned. The rests may come loose

and the pan support may scratch the hob.

Always dry the burners and pan supports completely.

Water droplets or damp patches on the hob at the start

of cooking may damage the enamel.

After cleaning and drying the burners, make sure the

burner caps are correctly positioned on the diffuser.

Caution!

■ Do not remove the control knobs when cleaning the

appliance. The appliance may be damaged if

moisture finds its way inside.

■ Do not use steam cleaners. This could damage the

hob.

Maintenance

Always clean off any liquid as soon as it is spilt. This will

prevent food remains from sticking to the hob surface

and you will save yourself any unnecessary effort.

Due to the high temperatures endured, the wok burner

and the stainless steel zones (grease drip tray, burner

outline, etc.) can change colour. This is normal. After

each use, clean these areas with a product that is

suitable for stainless steel.

It is recommended that the cleaning product available

from our Technical Assistance Service (code 311499)

is used regularly.

Caution!

The stainless steel cleaner must not be used in the area

around the controls. The (printed) symbols may be

wiped off.

Do not leave acidic liquids (e.g. lemon juice, vinegar,

etc.) on the hob.

3Trouble shooting

Tr oubl e s hoot i ng

Sometimes certain faults detected can be easily

resolved. Before calling the Technical Assistance

Service, bear in mind the following advice:

Fault Possible cause Solution

The general electrical system

is malfunctioning.

Defective fuse. Check the fuse in the main fuse box and change it if it is

damaged.

The automatic safety switch or circuit breaker has

tripped.

Check the main control panel to see if the automatic safety

switch or circuit breaker has tripped.

The automatic switching on

function does not work.

There may be food or cleaning products stuck between

the ignition sparkers and the burners.

The space between the ignition sparker and the burner

must be clean.

The burners are wet. Dry the burner caps carefully.

The burner caps are not correctly positioned. Check that the burner caps are correctly positioned.

The appliance is not earthed, is poorly connected or the

earthing is faulty.

Contact the installation technician.

The burner flame is not uni-

form.

The burner components are not correctly positioned. Correctly place the parts on the appropriate burner.

The grooves on the burner are dirty. Clean the grooves on the burner.

The gas flow is not normal or

there is no gas.

The gas supply is blocked by gas taps. Open all gas taps.

If the gas is supplied from a gas cylinder, check that it is

not empty.

Change the gas cylinder.

The kitchen smells of gas. A gas tap has been left on. Turn off the taps.

Incorrect coupling of gas cylinder. Check that the coupling is sound.

Possible gas leak. Shut off the gas supply, ventilate the premises and imme-

diately notify an authorised installation technician to check

and certify the installation. Do not use the appliance until

ensuring that there is no gas leak in the installation or

appliance itself.

Customer service en

4Customer service

Cus t omer ser vi ce

When contacting our customer service, please provide

the product number (E-Nr.) and production number (FD)

of the appliance. This information is given on the

specifications plate located on the lower section of the

hob and on the label in the user manual.

Please find the contact data of all countries in the

enclosed customer service list.

To book an engineer visit and product advice

Rely on the professionalism of the manufacturer. You

can therefore be sure that the repair is carried out by

trained service technicians who carry original spare

parts for your appliances.

Warranty conditions

In the unlikely event that the appliance is damaged or

does not meet your expectations in terms of quality,

please inform us as soon as possible. For the warranty

to be valid, the appliance must not have been tampered

with, or used inappropriately.

The applicable warranty conditions are those set out by

the company's representative office in the country of

purchase. Detailed information is available from retail

outlets. Proof of purchase must be presented to obtain

the benefits of the warranty.

We reserve the right to introduce changes.

7Environmental protection

Envi r onment al pr ot ec t i on

If the ) symbol is shown on the specifications plate,

bear in mind the following instructions:

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly

manner.

The packaging of your appliance has been

manufactured using only the materials which are strictly

necessary to guarantee efficient protection during

transport. These materials are 100% recyclable, thus

reducing the environmental impact. You can also

contribute to caring for the environment by following the

advice below:

■ Dispose of the packaging in the appropriate

recycling bin.

■ Before you get rid of an old appliance, make sure

you disable it. Contact your local authority to find out

the address of your nearest recycling centre to

dispose of your appliance.

■ Do not pour used oil down the sink. Collect it in a

sealed container and take it to an appropriate

collection point or, failing that, place it in the rubbish

bin (it will end up in a controlled dump; this is

probably not the best option, but it will avoid

contaminating ground water).

The burner immediately

switches off after releasing the

control knob.

The control knob was not held down for long enough. Once the burner is on, hold the control knob down a few

seconds longer.

The grooves on the burner are dirty. Clean the grooves on the burner.

Fault Possible cause Solution

GB 0344 892 8979

Calls charged at local or mobile rate.

IE 01450 2655

0.03 € per minute at peak. Off peak 0.0088 €

per minute.

This appliance is labelled in accordance with

European Directive 2012/19/EU concerning

used electrical and electronic appliances

(waste electrical and electronic equipment -

WEEE). The guideline determines the

framework for the return and recycling of used

appliances as applicable throughout the EU.

Bosch PBH6B5B60N Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PBH6B5B60N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info