Bedienungsanleitung Bosch PDR895B90N (Seite 4 von 20) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

533113

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

– D: Keine Veränderung an den Kleinstell-Düsen vornehmen.

4. Bedienknebel aufstecken.

Hinweis: Bringen Sie den Aufkleber mit der umgestellten Gasart

auf dem Typenschild an.

Ins tallation instructions

Important notes

Read these instructions carefully and keep them in a safe place.

Safety during use can only be ensured if the appliance is fitted

correctly according to these installation instructions. The

installer is responsible for ensuring that the appliance operates

perfectly at the point of installation.

The appliance must be connected to the mains only by a

licensed and trained technician.

Before carrying out any type of work, turn off the electricity and

gas supply.

For installation, currently applicable building regulations and the

regulations of local electricity and gas suppliers must be

observed (e.g. Germany: DVGW-TRGI/TRGF; Switzerland:

SVGW; Austria: ÖVGW-TR).

For conversion to another type of gas, please call the after-sales

service.

: Risk of gas escape!

After connecting the appliance to the gas supply, always check

the connection for leak tightness. The manufacturer accepts no

responsibility for the escape of gas from a gas connection

which has been previously tampered with.

Ensure sufficient air exchange in the room where the

appliance is installed. Up to 11 kW total output:

■ Minimum volume of the room where appliance is installed:

20 m³

■ A door leading to the open air or a window which can be

opened.

Up to 18 kW total output:

■ Minimum volume of the room where appliance is installed:

2 m³ per kW total output.

■ A door leading to the open air or a window which can be

opened.

■ An extraction hood into the open air. Minimum displacement

volume of extraction hood: 15 m³/h per kW total output.

For this appliance: 25 m³ / approx. 200 m³/h

The installation system must incorporate an all-pin isolating

switch with a contact opening of at least 3 mm, or the appliance

should be connected to the mains via a safety plug. The plug

must remain accessible after installation is complete.

Specifications on the rating plate showing voltage, type of gas

and gas pressure must agree with the local mains connection

conditions.

Do not kink or trap the mains connection cable.

This appliance corresponds to appliance class 3 (for installation

in a kitchen unit). It must be fitted according to the installation

drawing. The wall behind the appliance must be made of non-

flammable material.

This appliance is not intended for operation with an external

timer or an external remote control.

Do not install this appliance on boats or in vehicles.

Installing the appliance – picture 3

1. Fitting the support frame to the work surface (see built-in frame

installation instructions).

2. Place the gas hob into the support frame. Screw the rear of the

hob to the support frame on both sides with the two screws

provided.Do not overtighten the screws.

3. Fit the burner rings, burner lids and pan supports.

Gas connection

The gas connection must be located in a position where the

stop tap is accessible.

Using one of the R½'' (for appliance side) connection elbows

provided, connect the appliance with the associated gasket to a

fixed connection pipe or a gas safety hose. If the gas safety

hose is not (or only partly) made of metal, the ambient

temperature must not exceed 70°K. In the case of a gas safety

hose made entirely of metal, the permissible ambient

temperature is 115°K. The gas safety hose must be routed so

that it does not come into contact with moving parts of the

kitchen unit (e.g. drawers).

Electrical connection

Check that the appliance has the same voltage and frequency

as the electrical installation system.

The hob is delivered with a mains cable, with or without plug,

depending on model.

Only connect the appliance to sockets which have been fitted

and earthed according to regulations.

The appliance corresponds to type Y: the mains connection

cable must only be replaced by the after-sales service. Check

the cable type and minimum cross section.

Technical data / nozzle table

Conversion to another type of gas

This gas hob corresponds to the categories specified on the

rating plate. It is possible to convert the appliance to any of the

gases listed on the plate by changing the nozzles. The parts

required for the conversion are included in the modification kit

provided (depending on model). The modification kit can also

be ordered via our after-sales service.

A) Changing the nozzles – picture 5:

1. Remove the pan supports, burner lids and burner rings.

2. Change the nozzles. A suitable spanner can be obtained via

our after-sales service (ordering code 424699). Care should

be taken to ensure that the nozzles do not break off when

screwed in or out.

3. Screw the new nozzles in as far as they will go to achieve a

good seal.

4. Replace the pan supports, burner lids and burner rings,

checking that they are correctly positioned.

These burners do not require the primary air to be adjusted.

B) Adjusting the gas taps – picture 6:

1. Turn all control knobs to the off setting.

2. Pull off the control knobs. After removal, the flexible rubber

knob gasket can be seen. Do not remove the knob gasket.

Using the tip of the screwdriver, carefully push the knob gasket

to one side to gain access to the minimum flame nozzle.

3. Turn the minimum flame nozzle with a slotted screwdriver to

set the supply of gas to a minimum.

Depending on the type of gas to which you are converting,

carry out the following steps (see table):

– A: Screw the minimum flame nozzle fully in.

– B: Screw the minimum flame nozzles in until the flames do

not go out or jump back when the control knob is turned

from high to low flame.

– C: Minimum flame nozzles have to be changed by an

authorised specialist. Screw the minimum flame nozzles in

firmly:

Gas G20/

20mbar

G25 /

25mbar

G30 /

29mbar

G30 /

50mbar

Economy burner

1 kW

72 72+ 50 43

Standard burner

1.75 kW

100986758

High output burner

3 kW

115Y 128 85 74

Wok burner (outer)

Wok burner (inner)

115 117 71 63

5 kW

71+

5 kW

4.6 kW

Σ Qn (kW)

12.5 12.5 12.1 12.1

Σ (m³/h)

1.190 1.385 0.346 0.346

Σ (g/h)

909 909 880 880

* * * * *



* '

* ' $ & $



* % % & '



* & & & &



* % % ' &

$ % & :2.'

*PEDU

   

*$6

Bosch PDR895B90N Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PDR895B90N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info