Bedienungsanleitung Bosch Performance Line - Intuvia 2015 (Seite 35 von 219) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

780250

Zoom out

Zoom in

Vorherige Seite

1/219

Nächste Seite

English–9

Bosch eBike Systems 0 276 001 SPI | (3.6.15)

Power Supply of External Devices

via USB Connection

With the USB connection, it is possible to operate and charge

most devices whose power supply is possible via USB (e.g.,

various mobile phones).

Prerequisite for charging is that the on-board computer and a

sufficiently charged battery pack are inserted in the eBike.

Open the protective cap 8 of the USB port on the on-board

computer. Connect the USB connection of the external device

to the USB port 7 on the on-board computer using the USB

charging cable Micro A – Micro B (available from your Bosch

eBike dealer).

Once the consumer has been disconnected, the USB connec-

tion must be sealed again carefully with the protective cap 8.

A USB connection is not a waterproof plug-in connec-

tion. When riding in the rain, an external device must

not be connected and the USB connection must be com-

pletely sealed with the protective cap 8.

Notes on Riding with the eBike System

When does the eBike Drive Unit Operate?

The eBike drive unit assists you when riding, as long as you

step into the pedals. Without pedaling, there is no assistance.

The motor output always depends on the amount of your ped-

aling power.

When applying less pedaling power, the assistance or support

will be lower than when applying a lot of pedaling power. This

applies independent of the assistance Level.

The eBike drive automatically switches off at speeds in excess

of 25/45 km/h. When the speed falls below 25/45 km/h, the

drive is automatically available again.

An exception applies to the push-assistance function, in which

the eBike can be pushed at low speed without pedalling. The

pedals may also rotate when the push assistance is used.

The eBike can also be ridden as a normal bicycle without as-

sistance at any time, by either switching off the eBike system

or setting the assistance level to “OFF”. The same applies

when the battery pack is empty.

Interaction of the eBike System with the Bicycle Gears

The bicycle gears should be used as with a normal bicycle,

even with eBike motor assistance (please observe the operat-

ing instructions of your eBike).

Independent of the type of gearing, it is recommended to

briefly interrupt the pedaling while changing gears. This

makes changing gears easier and reduces the wear of the

drive train.

By selecting the right gear, you can increase the speed and

range with the same pedaling effort.

For this reason, follow the shift recommendations provided

by indications g and h on your display. If indication g is dis-

played, you should shift to a higher gear with lower cadence.

If indication h is displayed, you should select a lower gear with

higher cadence.

Gathering First Experience

It is recommended to gather first experience with the eBike

away from roads with heavy traffic.

Try out the different assistance levels. As soon as you feel

safe, you can participate in traffic with the eBike as with any

other bicycle.

Test the operating range of your eBike under different condi-

tions before planning longer and more challenging rides.

Influences on the Operating Range

The operating range depends on many factors, such as:

– Assistance level,

– Gear-switching behaviour,

– Bicycle tyres and tyre pressure,

– Age and condition of the battery pack,

– Route profile (inclines) and road or path conditions (road

or path surface),

– Head wind and ambient temperature,

– Weight of the eBike, rider and equipment/luggage.

610 Battery pack voltage error Restart the system. If the problem persists, contact your Bosch eBike

dealer.

620 Charging error Replace the charger. Contact your Bosch eBike dealer.

640 Internal battery pack error Restart the system. If the problem persists, contact your Bosch eBike

dealer.

655 Multiple battery pack errors Switch off the eBike system. Remove the battery pack and reinsert it. Re-

start the system. If the problem persists, contact your Bosch eBike dealer.

656 Software version error Contact your Bosch eBike dealer so that he can perform a software

update.

7xx Transmission error Please observe the operating instructions provided by the transmission

manufacturer.

No display Internal error of the on-board computer Restart your eBike system by switching it off and back on.

Code Cause Corrective Measure

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Performance Line - Intuvia 2015 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info