Bedienungsanleitung Bosch PFS 105 E WALLPaint (Seite 15 von 193) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544062

Zoom out

Zoom in

Vorherige Seite

1/193

Nächste Seite

English | 15

Bosch Power Tools 1 609 929 Y14 | (23.8.11)

f Never point the spray jet against yourself, towards oth-

er persons or animals. Keep your hands and other body

parts away from the spray jet. If the spray jet should

penetrate the skin, seek medical attention immediate-

ly from a doctor. The material being sprayed can even

penetrate the skin through a glove and be injected into

your body.

f Do not treat an injection as a simple cut. A high-pressure

spray is able to inject toxins into the body and cause seri-

ous bodily injury. In the event that an injection occurs, seek

medical attention immediately.

f Be aware of possible hazards from the spray material.

Observe the information on drums/tanks/tins as well

as manufacturer information of the spray material, in-

cluding the request to wear personal protective equip-

ment. The manufacturer's instructions are to be observed

in order to reduce the risk of fire as well as injuries caused

through toxins, carcinogens, etc.

f Use only nozzles/nozzle inserts specified by the manu-

facturer. Never spray without the nozzle protection

mounted. Use of a special nozzle insert with the corre-

sponding nozzle protection reduces the probability that a

high-pressure jet penetrates the skin and injects toxins in-

to the body.

f Exercise caution when cleaning and changing nozzle in-

serts. If the nozzle insert should become clogged dur-

ing spraying, follow the manufacturer's instructions

for switching off the system and relieving the pressure

before removing the nozzle. Fluids under high pressure

can penetrate the skin, inject toxins into the body and lead

to serious injury.

f Keep the plug of the mains cord and the trigger switch

of the spray gun clear of paint and other fluids. Never

hold the cord by its connectors to support it. Failure to

follow the instruction can lead to electric shock.

f Supervise children. This will ensure that children do not

play with the fine-spray system.

f Children or persons that owing to their physical, senso-

ry or mental limitations or to their lack of experience or

knowledge, are not capable of securely operating the

fine-spray system, may only use this fine-spray system

under supervision or after having been instructed by a

responsible person. Otherwise, there is danger of operat-

ing errors and injuries.

Products sold in GB only: Your product is fitted with an

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Product Description and

Specifications

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

Intended Use

The power tool is intended for atomising solvent-based and

water-dilutable paints, finishes, primers, clear finishes, auto-

motive finishes, staining sealers, wood sealer-preservatives,

plant protectives, oil and disinfection agents.

The power tool is not suitable for spraying dispersions and la-

tex paint, caustic solutions, acidic coating materials, coating

materials with granules or solids as well as spray and drip-im-

peding materials.

Product Features

The numbering of the components shown refers to the repre-

sentation of the power tool on the graphic pages.

1Spray gun

2 Air cap

3 Union nut

4 Mark for SDS connection

5 Thumbwheel for spraying capacity

6 Hose port (spray gun)

7 Handle extension (only for 800 ml container)

8 Container for spray material, 800 ml

Container for spray material, 600 ml*

9 Trigger switch

10 Suction tube with container seal

green: for 800 ml container

white: for 600 ml container*

11 Nozzle

12 Nozzle seal

13 Air hose

14 SDS connector

15 Base unit

16 Control knob for On/Off and air-flow control

17 Set-down port for spray gun

18 Hose connection (base unit)

19 Handle

20 Accessory compartment

21 Air filter cover

22 Measuring cup

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

OBJ_BUCH-420-002.book Page 15 Tuesday, August 23, 2011 12:08 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PFS 105 E WALLPaint Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info