Bedienungsanleitung Bosch PFS 3000-2 (Seite 18 von 274) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544011

Zoom out

Zoom in

Vorherige Seite

1/274

Nächste Seite

18 | English

2 609 007 771 | (28.2.14) Bosch Power Tools

 Disconnect the plug from the power source and/or the

battery pack from the power tool before making any

adjustments, changing accessories, or storing power

tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

 Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

 Maintain power tools. Check for misalignment or bind-

ing of moving parts, breakage of parts and any other

condition that may affect the power tool’s operation. If

damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power

tools.

 Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

 Use the power tool, accessories and tool bits etc. in ac-

cordance with these instructions, taking into account

the working conditions and the work to be performed.

Use of the power tool for operations different from those

intended could result in a hazardous situation.

Service

 Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Fine-spray Systems

 Keep area clean, well lit and free of paint or solvent

containers, rags, and other flammable materials.

Spontaneous combustion may occur. Fire extinguisher

equipment shall be present and working at all times.

 Provide for good ventilation in the spraying area and

for sufficient fresh air in the complete room. Evaporat-

ing inflammable solvents create an explosive environment.

 Do not spray and clean with materials that have a flash

point of less than 55 °C. Use materials based on water,

non-volatile hydrocarbons or similar materials. Volatile

evaporating solvents create an explosive environment.

 Do not spray in the vicinity of ignition sources, such as

static electricity sparks, open flames, pilot lights, hot

objects, engines/motors, cigarettes and sparks from

plugging in or unplugging power cords or operating

switches. Such spark sources can ignite the spraying vi-

cinity/environment.

 Do not spray any liquid of unknown hazard potential.

Unknown materials can create hazardous conditions.

 Wear additional protective equipment such as appro-

priate protective gloves and protective masks or respi-

rators when spraying or handling chemicals. Wearing

protective equipment for the appropriate conditions re-

duces the exposure to hazardous substances.

 Be aware of possible hazards from the spray material.

Observe the information on drums/tanks/tins as well

as manufacturer information of the spray material, in-

cluding the request to wear personal protective equip-

ment. The manufacturer's instructions are to be observed

in order to reduce the risk of fire as well as injuries caused

through toxins, carcinogens, etc.

 Keep the plug of the mains cord and the trigger switch

of the spray gun clear of paint and other fluids. Never

hold the cord by its connectors to support it. Failure to

follow the instruction can lead to electric shock.

 Supervise children. This will ensure that children do not

play with the fine-spray system.

Products sold in GB only: Your product is fitted with a

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

OBJ_BUCH-2024-002.book Page 18 Friday, February 28, 2014 9:28 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PFS 3000-2 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info