Bedienungsanleitung Bosch PIE375N14E (Seite 9 von 16) (Englisch)

77609

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Powerboost function

The Powerboost function can be used to heat large amounts of

water more quickly than the power level

Š.

Usage restrictions

This function can always be activated for a hotplate, provided

the other hotplate in the same group is not in use (see

illustration). Otherwise,

› and Š flash in the heat setting display

for the selected hotplate; the

Š heat setting is then set

automatically.

Activating the function

1. Select a hotplate.

2. Touch the boostG symbol.

The

› display lights up.

The function is activated.

Deactivating the function

1. Select a hotplate.

2. Touch the boostG symbol.

The

› symbol is no longer displayed.

The function is deactivated.

Note: In certain circumstances, the Powerboost function may

turn off automatically in order to protect the electronic

components inside the hob.

Time program function

This function allows you to turn off a hotplate automatically.

A hotplate should switch off automatically

Enter a cooking time for your dish. The hotplate switches off

automatically once the set time has elapsed.

Setting procedure

1. Select the hotplate and set the heat setting.

2. Touch the r symbol. The Min and r displays light up and

‹‹ appears in the timer display.

3. Within the next 10 seconds, set the required cooking time in

the control panel.

The r display goes out. The cooking time begins to elapse.

Note: The same cooking time can be automatically

programmed for the all the hotplates. The programmed time

passes independently for each of the hotplates.

The Basic settings chapter provides information on

automatically programming the cooking time.

Changing or cancelling the time

Press the

r symbol. The r indicator lights up.

Change the cooking time using symbols 1 to 9 or press 0 to

cancel the time.

Once the time has elapsed

The hotplate switches off once this time has elapsed. A beep is

heard and

‹ appears on the hotplate and the time

programming function display shows

‹‹ for 10 seconds.

When the

r symbol is pressed, the displays turn off and the

beep goes off.

Notes

■ If a cooking time has been programmed, the display always

shows the time for this function. To view the remaining

cooking time for a hotplate, select the corresponding

hotplate.

■ If a time has been programmed for several hotplates, the

time of the selected hotplate is always shown.

■ Cooking times can be programmed for up to 99 minutes.

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. The

”‰ symbol and the residual

heat indicator

œ/• flash alternatively in the display.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).





 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PIE375N14E Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PIE375N14E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info