Bedienungsanleitung Bosch PIE645B17E (Seite 10 von 16) (Englisch)

533005

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Changing or cancelling the time

Select the hotplate . Press the

0 symbol and change the

cooking time with the + or - symbols, or set to

‹‹.

Once the time has elapsed

The hotplate switches off. A beep sounds and in the time

program function display

‹‹ appears for 10 seconds.

The

Ú indicator on the hotplate lights up. Pressing the 0

symbol turns off the indicators and stops the beeping.

Notes

■ If cooking times have been programmed for various

hotplates, the time programming function always displays the

time for the selected hotplate.

■ Any cooking time can be programmed for up to 99 minutes.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

How to program

1. The timer can be selected in two different ways:

■ If you have selected the hotplate: press the 0 symbol

twice.

■ If you have not selected the hotplate: press the 0 symbol.

The

Ú indicator next to the U symbol lights up. ‹‹ is

displayed on the time program function display.

2. Press the + or - symbol. The basic setting appears.

+ symbol: 10 minutes.

- symbol: 5 minutes.

3. Set the desired time using the + or - symbols.

After a few seconds, the time will start to elapse.

Changing or cancelling the time

Press the

0 symbol various times until the Ú indicator next to

the

U symbol lights up. Change the time or set to ‹‹ with

the + or - symbols.

Once the time has elapsed

A warning signal sounds.

‹‹ is displayed on the time program

function display. After 10 seconds the indicators turn off.

Pressing the

0 symbol turns off the indicators and stops the

beeping.

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. The

”, ‰ symbol and the residual

heat indicator

œ/• flash alternately in the display.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

Basic settings

The device has several basic settings. These settings may be

adapted to the user's individual needs.

Indicator Function

™‚

Childproof lock

‹ Deactivated.*

‚ Activated.

™ƒ

Audible signals

‹ Confirmation and error signals deactivated.

‚ Only error signal activated.

ƒ Only confirmation signal activated.

„ All signals activated.*

™†

Automatic programming of cooking time.

‹ Switched off.*

‚-ŠŠ Automatic shut-off time.

™‡

Duration of the time program function warning signal

‚ 10 seconds*.

ƒ 30 seconds.

„ 1 minute.

*Factory settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PIE645B17E Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PIE645B17E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info