Bedienungsanleitung Bosch PIE695DC1E (Seite 13 von 32) (Englisch)

630329

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Time-setting options en

OTime-setting options

Time-setting options

Your hob has three timer functions:

■ Programming the cooking time

■ Kitchen timer

■ Stopwatch function

Programming the cooking time

The hotplate automatically switches off after the time

that is set has elapsed.

Setting procedure:

1. Select the hotplate and the required heat setting.

2. Touch the y symbol. The ‹‹ symbol and theV

indicator light up in the timer display.

y lights up in the display for the hotplate.

3. Within the next 10 seconds, set the required cooking

time in the settings range.

4. Touch the y symbol to confirm the selected setting.

The cooking time begins to elapse.

Note: The same cooking time can be set automatically

for all hotplates. The set time for each of the hotplates

counts down independently.

You can find information on automatically programming

the cooking time in section ~ "Basic settings"

Frying sensor

If a cooking time has been programmed for a hotplate

and the frying sensor has been activated, the cooking

time will not begin to count down until the selected

temperature setting has been reached.

Changing or deleting the time

Select the hotplate and then touch the y symbol.

Change the cooking time in the settings range or set

‹‹ to delete the programmed cooking time.

Touch the y symbol to confirm the selected setting.

When the time has elapsed

The hotplate switches off, the y display flashes and

the hotplate switches to the ‹‹ heat setting. An audible

signal sounds.

‹‹ and the V indicator flash in the timer display.

When the y symbol is touched, the indicators go out

and the acoustic signal ceases.

Notes

■ To set a cooking time of under 10 minutes, always

touch 0 before you select the required value.

■ If a cooking time was programmed for several

hotplates, the time information for the selected

hotplate is shown in the timer display.

■ Select the relevant hotplate to call up the remaining

cooking time.

■ You can set a cooking time of up to ŠŠ minutes.

The kitchen timer

You can use the kitchen timer to set a time of up to 99

minutes.

This functions independently from the hotplates and

from other settings. This function does not automatically

switch off a hotplate.

Setting procedure

1. Touch the t symbol. The ‹‹ symbol and the V

indicator light up in the timer display.

2. Select the required time on the control panel and

touch the t symbol to confirm.

After a few seconds, the time begins to elapse.

Changing or deleting the time

Touch the Y symbol.

Change the cooking time in the settings range or set

‹‹ to delete the programmed cooking time.

Touch the Y symbol to confirm the selected setting.

When the time has elapsed

An audible signal sounds once the time has elapsed.

‹‹ and the V symbol flash in the timer display.

The indicators go out after touching the t symbol.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PIE695DC1E Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PIE695DC1E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info