Bedienungsanleitung Bosch PIP875N14E (Seite 13 von 16) (Englisch)

746112

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Normal noise while the appliance is working

Induction heating technology is based on the creation of

electromagnetic fields that generate heat directly at the base of

the pan. Depending on how the pan has been manufactured,

certain noises or vibrations may be produced such as those

described below:

A deep humming sound as in a transformer

This noise is produced when cooking on a high power level. It

is caused by the amount of energy transferred from the hob to

the pan. The noise disappears or becomes faint when the

power level is lowered.

A low whistling sound

This noise is produced when the pan is empty. It disappears

when water or food is added to the pan.

A crackling sound

This noise occurs in pans which are made from different

materials superimposed on one another. It is caused by the

vibrations that occur in the adjoining surfaces of the different

superimposed materials. The noise comes from the pan. The

amount of food and cooking method can vary.

A high-pitched whistling sound

This noise is produced mainly in pans made from different

materials superimposed on one another, and it occurs when

such pans are heated at maximum power on two hotplates at

the same time. The whistling disappears or becomes fainter as

soon as the power level is lowered.

Noise from the fan

For proper use of the electronic system, the temperature of the

hob must be controlled. For this purpose, the hob has a fan

that starts working when it detects excess temperatures at

different power levels. The fan may also work by inertia after the

hob has been switched off, if the temperature detected is still

too high.

Rhythmic sounds similar to the hands of a clock

This noise is only produced when the 3 or more left hotplates

are working and disappears or is reduced when one of the

hotplates is switched off.

The noises described are normal, they are part of induction

heating technology and not a sign of malfunction.

After-sales service

Our after-sales service is there for you if your appliance should

need to be repaired. We are committed fo find the best solution

also in order to avoid an unnecessary call-out.

E number and FD number:

Please quote the E number (product number) and the FD

number (production number) of your appliance when

contacting the after-sales service. The rating plate bearing

these numbers can be found on the appliance certificate.

Please note that a visit from an after-sales service engineer is

not free of charge, even during the warranty period.

Please find the contact data of all countries in the enclosed

customer service list.

To book an engineer visit and product advice

Trust the expertise of the manufacturer, and rest assured that

the repair will be carried out by trained service technicians

using original spare parts for your domestic appliance.

“ flashing

The control panel is wet or an object is

resting on it.

Dry the control panel area or remove the object.

“§ + number /

š + number /

¡ + number

Electronic system malfunction. Disconnect the hob from the mains. Wait 30 seconds or so, then con-

nect it again.*

”‹ / ”Š

There is an internal error in the system. Disconnect the hob from the mains. Wait 30 seconds or so, then con-

nect it again.*

”ƒ

The electronic system has overheated and

the corresponding hotplate has been

switched off.

Wait until the electronic system has cooled down completely. Then

press any symbol on the hob.*

”…

The electronic system has overheated and

all hotplates have been switched off.

—‚

Supply voltage outside normal operating

limits.

Please contact the local electricity board.

—ƒ / —„

The hotplate has overheated and switched

off to protect its working surface.

Wait until the electronic system has cooled down sufficiently before

switching it back on.

Indicator Malfunction Measure

* If the warning persists call the Technical Assistance Service.

Do not place hot pans on the control panel.

GB 0844 8928979

Calls from a BT landline will be charged at up to 3

pence per minute. A call set-up fee of up to 6 pence may

apply.

IE 01450 2655

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PIP875N14E Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PIP875N14E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info