Bedienungsanleitung Bosch PIV975N17E (Seite 11 von 16) (Englisch)

532989

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Changing or cancelling the time

Select the hotplate and press the

0 symbol twice.

The __ and

r displays appear

Change the cooking time using symbols 1 to 9 or press 0 to

cancel the time.

Once the time has elapsed

The hotplate switches off once this time has elapsed. A beep is

heard and

‹.‹ appears in the hotplate and the time

programming function display shows

‹‹ for 10 seconds.

When the

0 symbol is pressed, the displays turn off and the

beep goes off.

Notes

■ If a cooking time has been programmed, the display always

shows the time of this function. To check the cooking time

remaining in a hotplate, select a hotplate and press the

symbol twice.

■ If a time has been programmed for several hotplates, the

time of the selected hotplate is always shown.

■ Any cooking time can be programmed for up to 99 minutes.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

How to program

1. Press the 0 symbol. The indicator U lights up. ‹‹ lights up

in the time program function display.

2. Set the required time using symbols 1 to 9.

The time starts again after a few seconds.

Once the time has elapsed

Once the time has elapsed, a beep will sound.

‹‹ and Uare

displayed in the time program function display. After pressing

the

0 symbol, the indications turn off.

Changing or cancelling the time

Press the

0 symbol, the U indicator lights up.

Change the time using the 1 to 9 symbols or press 0 to cancel.

Cleaning lock function

Cleaning the control panel while the hob is on may change the

settings.

In order to avoid this, the hob has a cleaning lock function.

Press the

>D symbol. A signal sounds. The control panel is

locked for 35 seconds. The surface of the control panel can

now be cleaned without risk of changing the settings.

Note: The lock does not affect the main switch. The hob may

be switched off when desired.

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. The

”‰ symbol and the residual

heat indicator

œ/• flash alternatively in the display.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

Basic settings

The device has several basic settings. These settings may be

adapted to the user's individual needs.

Indicator Function

™‚

Childproof lock

‹ Deactivated.*

‚ Activated.

™ƒ

Audible signals

‹ Confirmation and error signals deactivated.

‚ Only confirmation signal deactivated.

ƒ All signals activated.*

™†

Automatic programming of cooking time

‹ Switched off.*

‚-ŠŠ Automatic shut-off time.

*Factory settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PIV975N17E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PIV975N17E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info