Bedienungsanleitung Bosch POF 1200 AE (Seite 21 von 146) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

78174

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

English | 21

Bosch Power Tools 1 609 929 S76 | (21.7.09)

f Do not use blunt or damaged router bits.

Blunt or damaged router bits cause in-

creased friction, can become jammed and

lead to imbalance.

f When working with the machine, always

hold it firmly with both hands and provide

for a secure stance. The power tool is guided

more secure with both hands.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

f Keep your workplace clean. Blends of mate-

rials are particularly dangerous. Dust from

light alloys can burn or explode.

f Always wait until the machine has come to

a complete stop before placing it down. The

tool insert can jam and lead to loss of control

over the power tool.

f Never use the machine with a damaged ca-

ble. Do not touch the damaged cable and

pull the mains plug when the cable is dam-

aged while working. Damaged cables in-

crease the risk of an electric shock.

Products sold in GB only: Your product is fitted

with an BS 1363/A approved electric plug with

internal fuse (ASTA approved to BS 1362).

If the plug is not suitable for your socket outlets,

it should be cut off and an appropriate plug fit-

ted in its place by an authorised customer serv-

ice agent. The replacement plug should have the

same fuse rating as the original plug.

The severed plug must be disposed of to avoid a

possible shock hazard and should never be in-

serted into a mains socket elsewhere.

Products sold in AUS and NZ only: Use a resid-

ual current device (RCD) with a rated residual

current of 30 mA or less.

Functional Description

Read all safety warnings and all in-

structions. Failure to follow the

warnings and instructions may re-

sult in electric shock, fire and/or se-

rious injury.

Intended Use

The machine is intended for routing grooves, edg-

es, profiles and elongated holes as well as for

copy routing in wood, plastic and light building

materials, while resting firmly on the workpiece.

With reduced speed and with appropriate rout-

ing bits, non-ferrous alloys can also be machined.

Product Features

The numbering of the product features refers to

the illustration of the machine on the graphics

page.

1 Lock-off button for On/Off switch

2 Right handle

3 Spindle lock button

4 Wing bolt for guide rods of parallel guide

(2x)*

5 Chip shield

6 Base plate

7 Guide plate

8 Seat for parallel guide rods

9 Step buffer

10 Dust boot

11 Wing bolt for depth stop adjustment

12 Slide with index mark

13 Depth stop

14 Scale for depth-of-cut

15 Left handle

16 Clamping lever for locking of routing depth

17 Scale for depth-of-cut fine adjustment

(POF 1400 ACE)

18 Adjustment knob for depth-of-cut fine

adjustment (POF 1400 ACE)

19 Mark for zeroing

20 Release lever for guide bushing

21 Router bit*

22 On/Off switch

23 Thumbwheel for speed preselection

24 Adjusting screws for step buffer

(POF 1200 AE)

25 Tightening nut with collet

26 Open-end spanner, size 19 mm*

27 Extraction hose (Ø 35 mm)*

OBJ_BUCH-323-003.book Page 21 Tuesday, July 21, 2009 12:51 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch POF 1200 AE Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info