Bedienungsanleitung Bosch POF1300ACE (Seite 18 von 99) (Englisch, Französisch, Spanisch)

23203

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

English - 6

Routing with Parallel Guide

(Accessory – see figures + )

Slide the parallel guide 30 with the guide rods 31

into the base plate 12 and tighten at the required

measure with the wing bolts 16.

Guide the machine with uniform feed and side-

ward pressure on the parallel guide 30 along the

edge of the workpiece.

Routing Circular Arc Profiles

(see figures + )

Reverse the parallel guide 30 (facing surfaces

point upwards) and insert the guide rods into the

base plate 12. Fasten centring pin 32 to parallel

guide (through hole) with wing bolt 33.

Puncture centring pin into marked centre of the

circular arc and guide router with consistent feed

across the workpiece surface.

Routing with the Curve Buffer

(see figures + )

Slide the parallel guide 30 with the guide rods 31

into the base plate 12. Fasten the curve buffer 34

with the guide roller mounted to the parallel

guide 30.

Guide the machine along the workpiece edge

with light sideward pressure.

Routing with the Router Compass

(Accessory – see figure )

Use the router compass/guide rail adapter 35

(accessory) for circular routing jobs.

Mount the router compass as shown in the figure.

Screw pointed centring screw 40 in thread. Insert

the point of the centring screw in the centre of the

circular arc to be milled and ensure that it en-

gages in the workpiece surface.

Coarse-adjust the required radius by positioning

the router compass, then tighten the locking

screws 37 and 38.

After loosening the locking screw 37, the router

compass can be reset with the fine adjustment

knob 39 (1 scale mark = 0.1 mm/1 rotation =

2.0 mm).

Lead the router over the workpiece, holding the

router with the right handle 19 and the additional

router compass handle 36.

Routing with Guide Rail

(Accessory – see figure )

Working with the guide rail 42 is possible only

with use of the guide-rail adapter 35 (accessory).

Straight routing cuts are to be carried out with

help of the guide rail 42 (accessory).

For this, always use the base spacer 41 (acces-

sory) to compensate the height difference.

Mount the guide-rail adapter 35 with the guide

rods 31.

Place the guide rail on the workpiece and mount

with a suitable clamping device (e. g. screw

clamp).

Place the router with guide-rail adapter 35 on the

guide rail.

■ Before any work on the machine itself, pull

the mains plug.

■ For safe and proper working, always keep

the machine and the ventilation slots clean.

If the machine should fail despite the care taken

in manufacturing and testing procedures, repair

should be carried out by an after-sales service

centre for Bosch power tools.

In all correspondence and spare parts orders,

please always include the 10-digit order number

given on the nameplate of the machine.

WARNING! Important instructions for con-

necting a new 3-pin plug to the 2-wire cable.

The wires in the cable are coloured according to

the following code:

Do not

connect the blue or brown wire to the

earth terminal of the plug.

Important: If for any reason the moulded plug is

removed from the cable of this machine, it must

be disposed of safely.

G H

I K

Maintenance and Cleaning

strain relief

live = brown

neutral = blue

To be fitted

by qualified

professional only

1 609 929 F23 - Buch Seite 6 Montag, 19. April 2004 8:27 08

18 • 1 609 929 F23 • 04.04

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch POF1300ACE Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch POF1300ACE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info