Bedienungsanleitung Bosch PowerPack 500 - Intuvia (Seite 30 von 113) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Norwegisch)

733047

Zoom out

Zoom in

Vorherige Seite

1/113

Nächste Seite

English–4

0 276 001 SAI | (29.5.15) Bosch eBike Systems

eShift with SRAM DD3 Pulse

The gear hub of the SRAM DD3 Pulse works on a speed-de-

pendent basis. Regardless of which gear is engaged on the de-

railleur gears, one of the three gears of the gear hub will auto-

matically be engaged “Gear: Auto”.

The engaged gear will be shown briefly on the display whenev-

er the gear of the gear hub is shifted.

If the eBike is brought to a standstill from a speed of more

than 10 km/h, the system can automatically switch back to a

set “Start gear”. The “Start gear” can be set in the basic set-

tings menu (see “Displaying/Adapting Basic Settings” on page

English–6).

In the “Gear” mode you can use the “–” or “+” button on

the operating unit to switch back and forth between several

defined transmission ratios. The engaged transmission ratio

(gear) is shown on the display.

In the “Gear” manual mode, the system can also automati-

cally switch back to a set “Start gear”.

The drive unit recognises the gear shift and briefly reduces

the motor assistance level as a result of it, which means the

gear can also be shifted at any time under load or on a hill.

eShift with Shimano Di2

For Shimano eShift you use the Shimano control lever to shift

gears.

The engaged gear will be shown briefly on the display whenev-

er the gear of the gear hub is shifted.

The drive unit recognises the gear shift and briefly reduces

the motor assistance level as a result of it, which means the

gear can also be shifted at any time under load or on a hill.

If the eBike is brought to a standstill from a speed of more

than 10 km/h, the system can automatically switch back to a

set “Start gear”. The “Start gear” can be set in the basic set-

tings menu (see “Displaying/Adapting Basic Settings” on page

English–6).

Displays and configurations of the on-board

computer

Energy supply of the on-board computer

If the on-board computer is in the holder 4, a sufficiently

charged battery pack is inserted in the eBike and the eBike

system is turned on, then the on-board computer is powered

by the battery pack of the eBike.

If the on-board computer is removed from the holder 4, the

energy is supplied via an internal battery pack. If the internal

battery pack is weak when the on-board computer is switched

on, “Attach to bike” will appear in text indication d for 3 s.

The on-board computer will then turn off again.

To charge the internal battery pack, put the on-board comput-

er back in the holder 4 (when a battery pack is inserted in the

eBike). Switch the eBike battery pack on by its On/Off button

(see battery pack operating instructions).

You can also charge the on-board computer via the USB port.

Open the protective cap 8. Connect the USB port 7 of the on-

board computer via a suitable USB cable to a standard USB

charger or the USB port of a computer (5 V charging voltage,

max. 500 mA charging current). “USB connected” will ap-

pear in text indication d of the on-board computer.

Switching on/shutting down the on-board computer

To switch on the on-board computer, briefly press the On/Off

button 5. The on-board computer can also be switched on

when it is not inserted in the holder (if the internal battery

pack is sufficiently charged).

To switch off the on-board computer, press the On/Off but-

ton 5.

If the on-board computer is not inserted in the holder, it auto-

matically switches off after 1 minute to save energy if no but-

ton is pressed.

If you do not use your eBike for several weeks, remove

the on-board computer from its holder. Store the on-

board computer in a dry environment at room tempera-

ture. Regularly recharge the on-board computer’s battery

pack.

Battery Charge-control Indicator

The battery charge-control indicator i displays the charge

level of the eBike battery pack, not that of the on-board com-

puter’s internal battery pack. The charge level of the eBike

battery pack can also be checked on the LEDs of the battery

pack itself.

If the on-board computer is removed from the holder 4, the

last displayed battery charge level is saved.

Setting the Assistance Level

On the operating unit 10 you can set how much the eBike

drive assists you while pedalling. The assistance level can be

changed at any time, even while cycling.

Note: For individual versions, it is possible that the assistance

level is pre-set and cannot be changed. It is also possible that

less assistance levels are available for selection than listed

here.

On indicator i, each bar of the battery pack symbol is equiva-

lent to a capacity of approx. 20 %:

The eBike battery pack is fully charged.

The eBike battery pack should be recharged.

The LEDs of the charge-control indicator on the

battery pack extinguish. The capacity for assisting

the drive has been used up, and assistance is gen-

tly switched off. The remaining capacity is made

available for the lighting and the on-board comput-

er. The indicator flashes.

The capacity of the eBike battery pack is enough

for about 2 hours of lighting. This does not account

for other consumers (e.g. automatic gearbox,

charging external devices at the USB port).

OBJ_BUCH-2074-005.book Page 4 Friday, May 29, 2015 7:41 PM

Bosch PowerPack 500 - Intuvia Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info