Bedienungsanleitung Bosch PPR 250 (Seite 16 von 184) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544063

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

16 | English

2 609 006 717 | (26.11.13) Bosch Power Tools

Products sold in GB only: Your product is fitted with a

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Symbols

The following symbols can be important for the operation of

your power tool. Please memorise the symbols and their

meanings. The correct interpretation of the symbols helps

you operate the power tool better and more secure.

Product Description and Specifications

Intended Use

The machine is intended only for painting water-based disper-

sion wall paint.

Use the machine only when you can fully assess all functions

and handle them without limitation, or after having received

appropriate instructions.

Product Features

The numbering of the components shown refers to the repre-

sentation of the power tool on the graphic pages.

1 Paint applicator extension

2 Feed hose

3 Paint applicator

4 Intake hose

5 Base unit

Paint applicator

6 Remote control holder

7 Trigger switch

8 Remote control (PaintControl system)

9 Extension handle

10 Screw connection of extension

11 Paint applicator handle

12 Guide groove for feed hose

13 Feed-hose connection on paint applicator

14 Bucket holder

15 Roll holder

16 Paint roll

17 Roll axle

Base unit

18 On/Off switch

19 Carrying handle

20 Pump lid

21 Holding clamp

22 Paint filter

23 Pump lock

24 Pedestal

25 Pump-hose connection

26 Feed-hose connection on base unit

27 Double-SDS-connector

28 Pump-hose holding clip

29 Height-adjustable paint-bucket coupling

Components for cleaning

30 Mixing-nozzle spanner

31 Water tap-adapter with gasket

32 SDS connection on paint filter

33 Pump hose

34 Bypass hose

35 Rotor

36 Paint distributor

37 Paint chamber

38 Distributor plate

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Symbol Meaning

 Wait until the rotor has come to a

complete stop. Touching a rotating

rotor can lead to injuries.

Adapting the height-adjustable paint-

bucket coupling to the height of the paint

bucket:

base unit must always stand level on the

floor.

leftward

Pump lock engaged (pump

function possible only in this

position)

rightward

Pump lock disengaged

OBJ_BUCH-1513-004.book Page 16 Tuesday, November 26, 2013 4:07 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PPR 250 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info