Bedienungsanleitung Bosch PPS 7 S (Seite 37 von 537) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544022

Zoom out

Zoom in

Vorherige Seite

1/537

Nächste Seite

English | 37

Bosch Power Tools 1 609 929 W71 | (30.3.11)

f Operation as a pull push saw:

fGuide the saw blade against the work-

piece only when the machine is switched

on. Otherwise there is damage of kickback,

when the saw blade becomes wedged in the

workpiece.

fSecure the workpiece. A workpiece

clamped with clamping devices or in a vice is

held more secure than by hand.

f Operation as a table saw:

Guide the workpiece only against the run-

ning saw blade. Otherwise, there is danger

of kickback when the saw blade becomes

wedged in the workpiece.

f Keep handles dry, clean, and free from oil

and grease. Greasy, oily handles are slippery

causing loss of control.

f Operate the power tool only when the work

area to the workpiece is clear of any adjust-

ing tools, wood chips, etc. Small pieces of

wood or other objects that come in contact

with the rotating saw blade can strike the op-

erator with high speed.

f Use the machine only for cutting the mate-

rials listed under Intended Use. Otherwise,

the machine can be subject to overload.

f Only saw one workpiece at a time. Work-

pieces placed on top or aside of each other

can cause the saw blade to jam or the work-

pieces to move against each other while saw-

ing.

f Always use the universal guide. This im-

proves the cutting accuracy and reduces the

possibility that the saw blade becomes

wedged or jams.

f Use the machine for grooving or rebating

only with an appropriately suitable protec-

tive device (e. g. a tunnel blade guard).

f Do not use the machine for cutting slots

(stopped grooves).

f For all cuts, firstly ensure that the saw

blade cannot touch or graze against the

stops or any other machine parts. When the

saw blade becomes wedged or caught in oth-

er machine parts, there is danger of kickback

and the power tool can be considerably dam-

aged.

f If the saw blade should become jammed,

switch the machine off and hold the work-

piece until the saw blade comes to a com-

plete stop. To prevent kickback, the work-

piece may not be moved until after the

machine has come to a complete stop. Cor-

rect the cause for the jamming of the saw

blade before restarting the machine.

f Do not use dull, cracked, bent or damaged

saw blades. Unsharpened or improperly set

saw blades produce narrow kerf causing ex-

cessive friction, blade binding and kickback.

f Always use saw blades with correct size

and shape (diamond versus round) of arbor

holes. Saw blades that do not match the

mounting hardware of the saw will run ec-

centrically, causing loss of control.

f Do not use high speed steel (HSS) saw

blades. Such saw blades can easily break.

f Do not touch the saw blade after working

before it has cooled. The saw blade be-

comes very hot while working.

Never operate the machine without the in-

sert plate. Replace a defective insert plate.

Without flawless insert plates, injuries are

possible from the saw blade.

f Check the cable regularly and have a dam-

aged cable repaired only through an author-

ised customer service agent for Bosch pow-

er tools. Replace damaged extension

cables. This will ensure that the safety of the

power tool is maintained.

f Store the machine in a safe manner when

not being used. The storage location must

be dry and lockable. This prevents the ma-

chine from storage damage, and from being

operated by untrained persons.

f Do not direct the laser beam at persons or

animals and do not stare into the laser

beam yourself. This measuring tool produc-

es laser class 1M laser radiation according to

EN 60825-1. Looking or viewing directly into

the laser beam – especially with optical in-

struments such as binoculars etc. – can dam-

age the eye.

OBJ_BUCH-1259-002.book Page 37 Wednesday, March 30, 2011 11:02 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PPS 7 S Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info