Bedienungsanleitung Bosch psb 14 4 (Seite 20 von 126) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

388580

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

20 | English

2 609 004 467 | (21.1.10) Bosch Power Tools

Changing the Tool (see figure C)

f Before any work on the machine (e. g.,

maintenance, tool change, etc.) as well as

during transport and storage, set the rota-

tional direction switch to the centre posi-

tion. Unintentional actuation of the On/Off

switch can lead to injuries.

The drill spindle is locked when the On/Off

switch 11 is not pressed. This makes quick, con-

venient and easy changing of the tool in the drill

chuck possible.

Open the keyless chuck 2 by turning in rotation

direction n, until the tool can be inserted. Insert

the tool.

Firmly tighten the collar of the keyless chuck 2

by hand in rotation direction o. This automati-

cally locks the drill chuck.

The locking is released again to remove the tool

when the collar is turned in the opposite direc-

tion.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Operation

Starting Operation

Inserting the Battery

f Use only original Bosch lithium ion batter-

ies with the voltage listed on the nameplate

of your power tool. Using other batteries can

lead to injuries and pose a fire hazard.

Set the rotational direction switch 10 to the cen-

tre position in order to avoid unintentional start-

ing. Insert the charged battery 7 into the handle

so that it can be felt to engage and faces flush

against the handle.

Reversing the Rotational Direction

(see figures D–E)

The rotational direction switch 10 is used to re-

verse the rotational direction of the machine.

However, this is not possible with the On/Off

switch 11 actuated.

Right Rotation: For drilling and driving in

screws, push the rotational direction switch 10

left to the stop.

The indicator for right rotation 5 lights up

when the On/Off switch 11 is actuated

and the motor is running.

Left Rotation: For loosening or unscrewing

screws, push the rotational direction switch 10

right to the stop.

The indicator for left rotation 6 lights up

when the On/Off switch 11 is actuated

and the motor is running.

Setting the Torque / Setting the Operating

Mode

The required torque can be preselected in 10

steps with the torque preselection ring 3. With

the correct setting, the insert tool is stopped as

soon as the screw is screwed flush into the ma-

terial or when the set torque is reached.

Select a higher setting when driving out screws,

or set to the symbol “Drilling”.

OBJ_BUCH-870-003.book Page 20 Thursday, January 21, 2010 8:46 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch psb 14 4 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info