Bedienungsanleitung Bosch PSB 14.4 V-1 (Seite 18 von 107) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

78234

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

1 609 929 M27 | (7.8.07) Bosch Power Tools

18 | English

Assembly

Battery Charging

A battery that is new or has not been used for a

longer period does not develop its full capacity

until after approx. 5 charging/discharging cycles.

To remove the battery 8, press the battery un-

locking button 9 and pull the battery out of the

power tool toward the rear. Do not exert any

force.

The battery is equipped with a NTC temperature

control which allows charging only within a tem-

perature range of between 0 °C and 45 °C. A long

battery service life is achieved in this manner.

A significantly reduced working period after

charging indicates that the battery is used and

must be replaced.

Observe the notes for disposal.

Auxiliary Handle

f Before any work on the machine (e. g., main-

tenance, tool change, etc.) as well as during

transport and storage, set the rotational di-

rection switch to the centre position. Unin-

tentional actuation of the On/Off switch can

lead to injuries.

f Operate your machine only with the auxiliary

handle 12.

The auxiliary handle 12 can be set to any position

for a secure and low-fatigue working posture.

Turn the wing bolt for adjustment of the auxiliary

handle 11 in anticlockwise direction and set the aux-

iliary handle 12 to the required position. Then tight-

en the wing bolt 11 again in clockwise direction.

Adjusting the Drilling Depth (see figure A)

The required drilling depth X can be set with the

depth stop 13.

Press the button for the depth stop adjustment

10 and insert the depth stop into the auxiliary

handle 12.

Pull out the depth stop until the distance be-

tween the tip of the drill bit and the tip of the

depth stop correspond with the desired drilling

depth X.

Changing the Tool (see figure B)

f Before any work on the machine (e. g., main-

tenance, tool change, etc.) as well as during

transport and storage, set the rotational di-

rection switch to the centre position. Unin-

tentional actuation of the On/Off switch can

lead to injuries.

Hold the rear sleeve 3 of the keyless chuck 1 tight

and turn the front sleeve 2 in rotation direction

n, until the tool can be inserted. Insert the tool.

Hold the rear sleeve 3 of the keyless chuck 1 tight

and firmly turn the front sleeve 2 in rotation di-

rection o by hand until the locking action is no

longer heard. This automatically locks the drill

chuck.

The locking is released again to remove the tool

when the front sleeve 2 is turned in the opposite

direction.

Screwdriver Tools (see figure C)

When working with screwdriver bits 14, a univer-

sal bit holder 15 should always be used. Use only

screwdriver bits that fit the screw head.

For driving screws, always position the “Drill-

ing/Impact Drilling” selector switch 4 to the

“Drilling” symbol.

Replacing the Drill Chuck

f Before any work on the machine (e. g., main-

tenance, tool change, etc.) as well as during

transport and storage, set the rotational di-

rection switch to the centre position. Unin-

tentional actuation of the On/Off switch can

lead to injuries.

For machines without spindle lock, the drill

chuck must be replaced through an authorized

after-sales service agent for Bosch power tools.

The drill chuck must be tightened with a

tightening torque of approx. 30–35 Nm.

OBJ_BUCH-14-002.book Page 18 Tuesday, August 7, 2007 9:42 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PSB 14.4 V-1 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info