Bedienungsanleitung Bosch PSB 18 LI-2 (Seite 9 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

508450

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

English | 9

Bosch Power Tools 2 609 007 103 | (14.2.13)

Safety Warnings for Drills and Screw-

driver

 Wear ear protectors when impact drilling. Exposure to

noise can cause hearing loss.

 Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory

or fastener may contact hidden wiring. Cutting accesso-

ry and fasteners contacting a “live” wire may make ex-

posed metal parts of the power tool “live” and could give

the operator an electric shock.

 Use auxiliary handle(s), if supplied with the tool. Loss

of control can cause personal injury.

 Use appropriate detectors to determine if utility lines

are hidden in the work area or call the local utility com-

pany for assistance. Contact with electric lines can lead

to fire and electric shock. Damaging a gas line can lead to

explosion. Penetrating a water line causes property dam-

age.

 Switch off the power tool immediately when the tool in-

sert jams. Be prepared for high reaction torque that

can cause kickback. The tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

 Hold the machine with a firm grip. High reaction torque

can briefly occur while driving in and loosening screws.

 Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

 Do not open the battery. Danger of short-circuiting.

Protect the battery against heat, e. g., against

continuous intense sunlight, fire, water, and

moisture. Danger of explosion.

 In case of damage and improper use of the battery, va-

pours may be emitted. Ventilate the area and seek

medical help in case of complaints. The vapours can irri-

tate the respiratory system.

 Use the battery only in conjunction with your Bosch

power tool. This measure alone protects the battery

against dangerous overload.

 Use only original Bosch batteries with the voltage list-

ed on the nameplate of your power tool. When using oth-

er batteries, e.g. imitations, reconditioned batteries or

other brands, there is danger of injury as well as property

damage through exploding batteries.

Additional Safety and Working In-

structions

 Dusts from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health and cause allergic reactions, lead to res-

piratory infections and/or cancer. Materials containing

asbestos may only be worked by specialists.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the

materials to be worked.

 To save energy, only switch the power tool on when using it.

 Prevent dust accumulation at the workplace. Dusts can

easily ignite.

 Before any work on the machine (e. g., maintenance,

tool change, etc.) as well as during transport and stor-

age, set the rotational direction switch to the centre

position. Unintentional actuation of the On/Off switch can

lead to injuries.

 The battery is supplied partially charged. To ensure full

battery capacity, completely charge the battery in the

battery charger before using for the first time.

 The battery is equipped with a NTC temperature con-

trol which allows charging only within a temperature

range of between 0 °C and 45 °C. A long battery ser-

vice life is achieved in this manner.

 Read the operating instructions of the battery charger.

 Apply the power tool to the screw only when it is

switched off. Rotating tool inserts can slip off.

 Adjust the gear switch only when the machine is at a

complete stop.

 Always push the gear selector and turn the operating

mode selector switch through to the stop. Otherwise,

the machine can become damaged.

 When the On/Off switch is pressed halfway or com-

pletely, the battery charge-control indicator indicates

the charge condition of the battery for several sec-

onds. It consists of 3 green LEDs.

 The 3 LEDs of the battery charge-control indicator

flash rapidly when the battery temperature is not with-

in the operating temperature range of –30 to +65°C,

and/or when the overload protection has responded.

Symbols

The following symbols are important for reading and under-

standing the operating instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

symbols will help you to use the machine in a better and safer

manner.

LED Capacity

Continuous lighting 3 x green ≥ 75%

Continuous lighting 2 x green 50—75%

Continuous lighting 1 x green 26—50%

Slow flashing 1 x green ≤ 25%

Symbol Meaning

PSB 14,4 LI-2/PSB 1440 LI-2/

PSB 18 LI-2:

Combination Cordless Drill

Grey-marked area: Handle (insulated

gripping surface)

OBJ_DOKU-30841-002.fm Page 9 Thursday, February 14, 2013 7:34 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PSB 18 LI-2 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info