Bedienungsanleitung Bosch PSB 1800 LI-2 (Seite 9 von 157) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

708154

Zoom out

Zoom in

Vorherige Seite

1/157

Nächste Seite

English | 9

Bosch Power Tools 1 609 92A 2UA | (11.10.17)

 Use power tools only with specifically designated bat-

tery packs. Use of any other battery packs may create a

risk of injury and fire.

 When battery pack is not in use, keep it away from oth-

er metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

 Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally oc-

curs, flush with water. If liquid contacts eyes, addition-

ally seek medical help. Liquid ejected from the battery

may cause irritation or burns.

Service

 Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Drills and

Screwdrivers

 Wear ear protectors when impact drilling. Exposure to

noise can cause hearing loss.

 Use auxiliary handle(s), if supplied with the tool. Loss

of control can cause personal injury.

 Hold power tool by insulated gripping surfaces when

performing an operation where the cutting accessory

or fastener may contact hidden wiring. Cutting accesso-

ry and fasteners contacting a “live” wire may make ex-

posed metal parts of the power tool “live” and could give

the operator an electric shock.

 Use appropriate detectors to determine if utility lines

are hidden in the work area or call the local utility com-

pany for assistance. Contact with electric lines can lead

to fire and electric shock. Damaging a gas line can lead to

explosion. Penetrating a water line causes property dam-

age.

 Switch off the power tool immediately when the tool

insert jams. Be prepared for high reaction torque that

can cause kickback. The tool insert jams when:

– the power tool is subject to overload or

– it becomes wedged in the workpiece.

 Hold the machine with a firm grip. High reaction torque

can briefly occur while driving in and loosening screws.

 Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

 Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam and

lead to loss of control over the power tool.

 Before any work on the machine (e. g., maintenance,

tool change, etc.) as well as during transport and stor-

age, set the rotational direction switch to the centre

position. Unintentional actuation of the On/Off switch can

lead to injuries.

 Do not open the battery. Danger of short-circuiting.

Protect the battery against heat, e. g., against

continuous intense sunlight, fire, water, and

moisture. Danger of explosion.

 In case of damage and improper use of the battery, va-

pours may be emitted. Ventilate the area and seek

medical help in case of complaints. The vapours can irri-

tate the respiratory system.

 Use the battery only in conjunction with your Bosch

product. This measure alone protects the battery against

dangerous overload.

 The battery can be damaged by pointed objects such as

nails or screwdrivers or by force applied externally. An

internal short circuit can occur and the battery can burn,

smoke, explode or overheat.

Additional Safety and Working

Instructions

 Dust from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health and cause allergic reactions, lead to res-

piratory infections and/or cancer. Materials containing

asbestos may only be worked by specialists.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the

materials to be worked.

 Prevent dust accumulation at the workplace. Dust can

easily ignite.

 To save energy, only switch the power tool on when using it.

 The power tool switches off automatically as soon as

the set torque is reached. The LED indicator flashes 3 x.

 The battery is supplied partially charged. To ensure full

battery capacity, completely charge the battery in the

battery charger before using for the first time.

 Read the operating instructions of the battery charger.

 Apply the power tool to the screw only when it is

switched off. Rotating tool inserts can slip off.

 Adjust the gear switch only when the machine is at a

complete stop.

 Always push the gear selector and turn the operating

mode selector switch through to the stop. Otherwise,

the machine can become damaged.

 If the gear switch cannot be pushed to the stop, turn

the drill chuck a little.

 When the On/Off switch is pressed halfway or com-

pletely, the battery charge-control indicator indicates

the charge condition of the battery for several sec-

onds. It consists of 3 green LEDs.

LED Capacity

Continuous lighting 3 x green ≥ 75%

Continuous lighting 2 x green 50—75%

Continuous lighting 1 x green 26—50%

Slow flashing 1 x green ≤ 25%

OBJ_BUCH-2806-003.book Page 9 Wednesday, October 11, 2017 10:54 AM

Bosch PSB 1800 LI-2 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info