Bedienungsanleitung Bosch PSB 530RA (Seite 23 von 133) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

473699

Zoom out

Zoom in

Vorherige Seite

1/133

Nächste Seite

English | 23

Bosch Power Tools 2 609 004 192 | (5.10.09)

Changing the Tool

Keyless Chuck (PSB 600 RE/PSB 650 RE/

PSB 650 RA) (see figure E)

The drill spindle is locked by pressing the spin-

dle lock button 2. This makes quick and easy

changing of the tool in the drill chuck possible.

Note: The machine is equipped with a safety de-

vice for locking the drill spindle to protect it

against damage. The spindle lock button 2 can

only be pressed when the machine is at stand-

still.

– Before inserting the drilling tool, close the

keyless chuck 1 until the drilling spindle also

turns.

– Press the spindle lock button 2 several times

while slightly turning the keyless chuck 1 left

and right.

– As soon as the spindle lock button 2 can be

pressed in, continue to turrn the keyless

chuck 1 in one direction until the spindle lock

button 2 can be pushed down completely.

– Open the keyless chuck 1 by turning in rota-

tion direction n, until the tool can be insert-

ed. Insert the tool.

– Firmly tighten the collar of the keyless chuck

1 by hand in rotation direction o until the

locking action (“click”) is no longer heard.

This automatically locks the chuck.

– The locking is released again to remove the

tool when the collar is turned in the opposite

direction.

– To remove the drilling tool, repeat above

mentioned steps.

Keyless Chuck (PSB 530 RA) (see figure F)

Hold the rear sleeve 27 of the keyless chuck 1

tight and turn the front sleeve 26 in rotation di-

rection n, until the tool can be inserted. Insert

the tool.

Hold the rear sleeve 27 of the keyless chuck 1

tight and firmly turn the front sleeve 26 in rota-

tion direction o by hand.

Screwdriver Tools

When working with screwdriver bits 25, a uni-

versal bit holder 24 should always be used. Use

only screwdriver bits that fit the screw head.

For driving screws, always position the “Drill-

ing/Impact Drilling” selector switch 3 to the

“Drilling” symbol.

Replacing the Drill Chuck

f For power tools without spindle lock, the

drill chuck must be replaced by an author-

ised after-sales service agent for Bosch

power tools.

Removing the Drill Chuck (see figure G)

Clamp the short end of an Allen key 28 into the

keyless chuck 1.

Place the machine on a firm surface, e. g. a

workbench. Hold the machine firmly, press the

spindle lock button 2 and loosen the keyless

chuck 1 by turning the Allen key 28 in rotation

direction n. Loosen a tight keyless chuck by giv-

ing the long end of the Allen key 28 a light blow.

Remove the Allen key from the keyless chuck

and completely unscrew the keyless chuck.

Mounting the Drill Chuck (see figure H)

The keyless chuck is mounted in reverse order.

The drill chuck must be tightened with a

tightening torque of approx. 6–8 Nm.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V

can also be operated with 220 V.

Reversing the Rotational Direction

(see figure I)

The rotational direction switch 8 is used to re-

verse the rotational direction of the machine.

However, this is not possible with the On/Off

switch 6 actuated.

OBJ_BUCH-379-003.book Page 23 Monday, October 5, 2009 9:57 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PSB 530RA Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info