Bedienungsanleitung Bosch psb 850 2 re (Seite 9 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

388386

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

English - 2

■ Use appropriate detectors to determine if

utility lines are hidden in the work area or

call the local utility company for assist-

ance.

Contact with electric lines can lead to fire and

electric shock. Damaging a gas line can lead

to explosion. Penetrating a water line causes

property damage or may cause an electric

shock.

■ If the drilling tool jams, it will cause the power

tool to jolt. If this occurs switch the machine off

immediately.

■ When working with the machine, always hold it

firmly with both hands and provide for a secure

stance.

■ Be careful when screwing in long screws; dan-

ger of sliding off.

■ When screwdriving, operate in first gear as

well as with a low speed.

■ Set the machine against the screw/nut only

when switched off.

■ Always switch the machine off and wait until it

has come to a standstill before placing it down.

■ Never allow children to use the machine.

■ Bosch is only able to ensure perfect operation

of the machine if the original accessories in-

tended for it are used.

The machine is intended for impact drilling in

brick, concrete and stone as well as for drilling in

wood, metal, ceramics and plastics. Machines

with electronic control and right/left rotation are

also suitable for screwdriving and thread-cutting.

■ When drilling use the auxiliary handle 11.

The auxiliary handle can be mounted on the left

or right side of the spindle collar, using the

winged screw 10.

The drilling depth can be set with the depth

stop 12. For this, press button 9 and pull the

depth stop out parallel until it protrudes as far as

the drill tip. Adjust the read scale value minus the

required drilling depth X on the scale.

Open the drill chuck until the tool can be inserted.

Insert the tool.

Spindle lock (AutoLock)

(see figure )

The fully automatic spindle locking feature allows

for quick, convenient and easy tool changing in

the drill chuck.

Firmly tighten the sleeve of the keyless chuck 1

by hand until the locking action (“click”) is no

longer heard. This automatically locks the chuck.

The locking system is loosened again, when the

drill socket is rotated in the opposite direction for

tool removal.

Key chuck (see figure )

Clamp evenly in all three holes with the chuck

key 13.

Caution! The chuck may be very hot:

During longer working periods, especially

when impact drilling, the chuck can become

very hot. In this case we recommend wearing

protective gloves.

Observe correct mains voltage: The voltage of

the power source must agree with the voltage

specified on the nameplate of the machine.

Equipment marked with 230 V can also be con-

nected to 220 V.

Switching On and Off

To start the machine, press the On/Off switch 6

and keep it depressed.

The machine runs with variable

speed between 0 and maximum,

depending on the pressure applied

to the On/Off switch 6. Light pres-

sure results in a low rotational

speed thus allowing smooth, con-

trolled starts.

Lock the pushed On/Off switch 6 by pressing the

lock-on button 5.

To switch off the machine, release the On/Off

switch 6 or push and release it then.

Intended Use

Auxiliary Handle/Depth Stop

(see figure )

Inserting the Tool

Initial Operation

9 • 2 609 932 245 • 02.07

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch psb 850 2 re Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info