Bedienungsanleitung Bosch PSM 18 LI (Seite 21 von 130) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

460544

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

English | 21

Bosch Power Tools 2 609 004 215 | (31.5.10)

Selecting the Sanding Sheet

Depending on the material to be worked and the

required rate of material removal, different

sanding sheets are available:

For reworking or polishing, especially of metal

and stone, use fleece/polishing cloth pad.

Depending on the desired surface quality of the

workpiece, different fleece types or polishing

cloth pads are to be used.

Replacing the Sanding Plate

(see figure F)

n Slide the SDS button for release of the sand-

ing plate 6 all the way to the right.

o Remove the sanding plate 5.

p Guide the sanding plate 5 from below

against the sanding plate holder and firmly

press them together.

q Slide the SDS button for release of the sand-

ing plate 6 all the way to the left.

If, e. g., the front tip of the sanding sheet is

worn, you can also remove the complete sand-

ing plate and reattach it turned by 120°.

Specialty Sanding Plates

You can replace the supplied sanding plate 5

with a specialty sanding plate, which is available

as an accessory.

The specialty sanding plate is attached in the

same manner as the one supplied.

Attach and remove the respective sanding

sheets in the same manner as when changing

original sanding sheets.

Pad Extender (see figure G)

With the pad extender 14 you can sand surfaces

that are difficult to access, such as sills on win-

dows, cabinets or doors.

Pad Extender, Narrow (see figure H)

With the narrow pad extender 15 you can sand

narrow openings, slots and passages.

Pad Extender, Narrow Rounded (see figure I)

The narrow rounded pad extender 17 allows you

to sand curved and hollow areas or surfaces that

are curved inward, such as on furniture, rails or

heating radiators.

Operation

Starting Operation

Inserting the Battery

f Use only original Bosch lithium ion batter-

ies with the voltage listed on the nameplate

of your power tool. Using other batteries can

lead to injuries and pose a fire hazard.

Switching On and Off

To start the machine, push the ON/Off switch 8

downward to position “1”.

To switch off the machine, push the On/Off

switch 8 upward to positon “0”.

Battery Charge-control Indication

The battery charge-control indicator 7 indicates

the charge condition of the battery when the

machine is switched on. It consists of 3 green

LEDs.

Grain size

For the working of all

wooden materials

40—180

For coarse-sanding, e. g.

of rough, unplaned beams

and boards

coarse 40

For face sanding and plan-

ing small irregularities

medium 80, 120

For finish and fine sanding

of wood

fine 180

For the working of paint/

enamel coats or primers

and fillers

40—180

For sanding off paint coarse 40

For sanding primer medium 80, 120

For final sanding of prim-

ers before coating

fine 180

OBJ_BUCH-1201-001.book Page 21 Monday, May 31, 2010 1:04 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PSM 18 LI Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info