Bedienungsanleitung Bosch PSR 10,8 LI-2 (Seite 12 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

460545

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

12 | English

2 609 004 660 | (27.4.10) Bosch Power Tools

f Switch off the power tool immediately

when the tool insert jams. Be prepared for

high reaction torque that can cause kick-

back. The tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

f Hold the machine with a firm grip. High re-

action torque can briefly occur while driving

in and loosening screws.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

f Keep your workplace clean. Blends of mate-

rials are particularly dangerous. Dust from

light alloys can burn or explode.

f Do not open the battery. Danger of short-

circuiting.

Protect the battery against heat, e. g.,

against continuous intense sunlight,

fire, water, and moisture. Danger of

explosion.

f In case of damage and improper use of the

battery, vapours may be emitted. Provide

for fresh air and seek medical help in case

of complaints. The vapours can irritate the

respiratory system.

f Use the battery only in conjunction with

your Bosch power tool. This measure alone

protects the battery against dangerous over-

load.

f Use only original Bosch batteries with the

voltage listed on the nameplate of your

power tool. When using other batteries, e. g.

imitations, reconditioned batteries or other

brands, there is danger of injury as well as

property damage through exploding batter-

ies.

Additional Safety and Working

Instructions

f Dusts from materials such as lead-contain-

ing coatings, some wood types, minerals

and metal can be harmful to one’s health

and cause allergic reactions, lead to respi-

ratory infections and/or cancer. Materials

containing asbestos may only be worked by

specialists.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

f Before any work on the machine (e. g.,

maintenance, tool change, etc.) as well as

during transport and storage, set the rota-

tional direction switch to the centre posi-

tion. Unintentional actuation of the On/Off

switch can lead to injuries.

f The battery is supplied partially charged. To

ensure full battery capacity, completely

charge the battery in the battery charger

before using for the first time.

f Read the operating instructions of the bat-

tery charger.

f Apply the power tool to the screw only

when it is switched off. Rotating tool inserts

can slip off.

f Adjust the gear switch only when the ma-

chine is at a complete stop.

f If the gear switch cannot be pushed to the

stop, turn the drill chuck a little.

f The battery charge-control indicator indi-

cates the charge condition of the battery

for a few seconds when the On/Off switch

is pressed half or fully through. It consists

of a three-colour illuminating LED.

LED Capacity

Continuous lighting, green

≥ 66%

Continuous lighting, orange

33—66%

Continuous lighting, red

11—33%

Flashing light, red

≤ 11%

OBJ_BUCH-1196-001.book Page 12 Tuesday, April 27, 2010 12:57 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PSR 10,8 LI-2 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info