Bedienungsanleitung Bosch psr 14 4 2 acc (Seite 13 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

388744

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

English | 132 609 001 965 • 11.10.06

d) Store idle power tools out of the reach of

children and do not allow persons unfamil-

iar with the power tool or these instruc-

tions to operate the power tool. Power tools

are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, breakage

of parts and any other condition that may

affect the power tool’s operation. If dam-

aged, have the power tool repaired before

use. Many accidents are caused by poorly main-

tained power tools.

f) Keep cutting tools sharp and clean. Prop-

erly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool

bits etc. in accordance with these instruc-

tions, taking into account the working con-

ditions and the work to be performed. Use

of the power tool for operations different from

those intended could result in a hazardous situ-

ation.

5) Battery tool use and care

a) Recharge only with the charger specified

by the manufacturer. A charger that is suita-

ble for one type of battery pack may create a risk

of fire when used with another battery pack.

b) Use power tools only with specifically des-

ignated battery packs. Use of any other bat-

tery packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects, that can make a con-

nection from one terminal to another.

Shorting the battery terminals together may

cause burns or a fire.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If

contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

6) Service

a) Have your power tool serviced by a quali-

fied repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

Machine-specific

Safety Warnings

f Hold the machine with a firm grip. High reaction

torque can briefly occur while driving in and loosen-

ing screws.

f Use appropriate detectors to determine if util-

ity lines are hidden in the work area or call the

local utility company for assistance. Contact

with electric lines can lead to fire and electric shock.

Damaging a gas line can lead to explosion. Pene-

trating a water line causes property damage or may

cause an electric shock.

f Switch off the power tool immediately when

the tool insert jams. Be prepared for high

reaction torque that can cause kickback. The

tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

f Hold the machine only by the insulated grip-

ping surfaces, when performing an operation

where the cutting tool may run into hidden

wiring. Contact with a “live” wire will make exposed

metal parts of the tool “live” and shock the operator.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

f Do not work materials containing asbestos.

Asbestos is considered carcinogenic.

f Take protective measures when dust can

develop during working that is harmful to

one’s health, combustible or explosive. Exam-

ple: Some dusts are regarded as carcinogenic.

Wear a dust mask and work with dust/chip extrac-

tion when connectable.

f Keep your workplace clean. Blends of materials

are particularly dangerous. Dust from light alloys

can burn or explode.

f Always wait until the machine has come to a

complete stop before placing it down. The tool

insert can jam and lead to loss of control over the

power tool.

f Avoid unintentional switching on. Ensure the

On/Off switch is in the off position before

inserting battery pack. Carrying the power tool

with your finger on the On/Off switch or inserting

the battery pack into power tools that have the

switch on invites accidents.

f Do not open the battery. Danger of short-

circuiting.

f Protect the battery against heat, e. g., also

against continuous sun irradiation and fire.

There is danger of explosion.

OBJ_BUCH-213-001.book Page 13 Wednesday, October 11, 2006 8:37 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch psr 14 4 2 acc Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info