386452
17
Zoom out
Zoom in
Vorherige Seite
1/127
Nächste Seite
English | 17
Bosch Power Tools 2 609 002 432 | (3.7.07)
f Switch off the power tool immediately when
the tool insert jams. Be prepared for high re-
action torque that can cause kickback. The
tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
f Hold the machine only by the insulated grip-
ping surfaces, when performing an opera-
tion where the cutting tool may run into hid-
den wiring. Contact with a “live” wire will
make exposed metal parts of the tool “live”
and shock the operator.
f Hold the machine with a firm grip. High reac-
tion torque can briefly occur while driving in
and loosening screws.
f Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
f Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
f Take protective measures when dust can de-
velop during working that is harmful to one’s
health, combustible or explosive. Example:
Some dusts are regarded as carcinogenic.
Wear a dust mask and work with dust/chip ex-
traction when connectable.
f Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
f Always wait until the machine has come to a
complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
f Avoid unintentional switching on. Ensure the
On/Off switch is in the off position before in-
serting battery pack. Carrying the power tool
with your finger on the On/Off switch or in-
serting the battery pack into power tools that
have the switch on invites accidents.
f Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e. g.,
also against continuous sun irradiation
and fire. There is danger of explosion.
f In case of damage and improper use of the
battery, vapours may be emitted. Provide for
fresh air and seek medical help in case of
complaints. The vapours can irritate the respi-
ratory system.
f When the battery is defective, liquid can es-
cape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Intended Use
The machine is intended for driving in and loos-
ening screws as well as for drilling in wood, met-
al, ceramic and plastic.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Screwdriver bit*
2 Keyless chuck
3 Torque preselection ring
4 Gear selector
5 Indicator for right rotation
6 Indicator for left rotation
7 Soft grip
8 Battery*
9 “Power Light”
10 Battery charge-control indicator
11 Rotational direction switch
12 On/Off switch
13 Battery unlocking button
14 Universal bit holder*
15 Securing screw for keyless chuck
16 Allen key*
*The accessories illustrated or described are not in-
cluded as standard delivery.
OBJ_BUCH-191-003.book Page 17 Tuesday, July 3, 2007 11:19 AM
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

bosch-psr-14-4-li-2

Suche zurücksetzen

  • Hallo,
    wenn ich den Ein/Ausschalter drücke, läuft der Motor nicht, aber die Lampen auf dem Akku-Sockel leuchten. Was ist da defekt? Eingereicht am 19-8-2020 12:46

    Antworten Frage melden
  • nach ausschaltung funken und rauchentwicklung am motor kollektor ? oder kohlen? reparatur? Eingereicht am 15-4-2020 16:08

    Antworten Frage melden
  • Bietet der Bosch Akkubohrschrauber PSR 14,4 die Möglichkeit sowohl Links- als auch Rechtslauf an? Eingereicht am 31-5-2018 17:15

    Antworten Frage melden
  • Nah dem Aufladen dreht sich der Kopf nur langsam und lässt sich nicht erhöhen Eingereicht am 16-1-2018 20:13

    Antworten Frage melden
  • Wie kann ich das Akkuteil vom Schaft der Bohrmaschine lösen ? Eingereicht am 27-12-2017 19:49

    Antworten Frage melden
  • ich bekomme den Akku nicht von der Maschine, trotz bestättigung der roten Hilfe Eingereicht am 6-8-2017 15:41

    Antworten Frage melden
  • kommt nicht auf drehzahl bleibt nach 2-3 sek stehen der akku ist aber voll Eingereicht am 29-5-2017 19:47

    Antworten Frage melden
  • Wie kann ich bei der PSR 14.4 Li den Akku wechseln? Eingereicht am 3-4-2017 14:00

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch psr 14 4 li-2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info