Bedienungsanleitung Bosch PSR 14-4 (Seite 9 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

473381

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

English - 2

■ Before any work on the machine (e. g.

maintenance, tool change, etc.) as well as

when transporting and storing, always set

the rotational direction switch to the centre

position. Unintentional actuating of the On/

Off switch may result in personal injury.

■ Do not open the battery yourself. There is

danger of a short circuit.

■ Protect the battery against heat, e. g., in-

cluding against continuous sun irradiation

and fire. There is danger of explosion.

■ Do not short-circuit the battery. There is

danger of explosion.

■ Use appropriate detectors to determine if

utility lines are hidden in the work area or

call the local utility company for assist-

ance.

Contact with electric lines can lead to fire and

electric shock. Damaging a gas line can lead

to explosion. Penetrating a water line causes

property damage.

■ Hold the power tool only by the insulated

gripping surfaces when performing an op-

eration where the cutting tool may contact

hidden wiring. Contact with a “live” wire will

also make exposed metal parts of the power

tool “live” and shock the operator.

■ Hold the machine with a firm grip. High re-

action torque can briefly occur while driving in

and loosening screws.

The machine is intended for driving in and loos-

ening screws as well as for drilling in wood, metal,

ceramic and plastic.

Battery Charging

A battery that is new or has not been used for a

longer period does not develop its full capacity

until after approximately 5 charging/discharging

cycles.

To remove the battery 7, press the unlocking but-

tons 8 and pull out the battery downwards. Do not

exert any force.

The battery is equipped with an NTC temperature

control which allows charging only within a tem-

perature range of between 0 °C and 45 °C.

A long battery service life is achieved in this man-

ner.

A significantly reduced working period after

charging indicates that the batteries are used and

must be replaced.

■ Observe the notes on environmental protec-

tion.

Open the drill chuck 3 by turning until the tool can

be inserted. Insert the tool.

Firmly tighten the sleeve of the keyless chuck 3

by hand. This automatically locks the chuck.

Rotate the sleeve in the reverse direction to re-

move the tool.

Screwdriving (see figure )

Insert the screwdriver blade 6 directly into the

tool holder or when using screwdriver bits 10, ad-

ditionally use the universal bit holder 11.

Inserting the Battery

■ Use only original Bosch O-pack batteries with

the voltage given on the type plate of your ma-

chine.

Set the rotational direction switch 5 to the centre

position = lock-off and allow the charged bat-

tery 7 to engage into the handle.

Reversing the Rotational Direction

Operate the rotational direction

switch 5 only at a standstill.

The rotational direction

switch 5 is used to re-

verse the rotational direc-

tion of the machine. How-

ever, this is not possible

with the On/Off switch 4

pressed.

Right Rotation ( )

Turn the rotational direction switch through to the

left stop (normal operation: drilling, screwdriving,

etc.).

Left Rotation ( )

Press the rotational direction switch through to

the right stop (for loosening and unscrewing

screws and nuts).

Intended Use

Before Putting into Operation

Changing the Tool

Starting Operation

2 609 932 475.book Seite 2 Dienstag, 14. Juni 2005 3:05 15

9 • 2 609 932 475 • TMS • 06.06.05

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PSR 14-4 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info