Bedienungsanleitung Bosch PSR 18 LI (Seite 7 von 9) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

543972

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

English | 7

Bosch Power Tools 1 619 X06 940 | (22.8.11)

Reversing the Rotational Direction (see figure F)

The rotational direction switch 8 is used to reverse the rota-

tional direction of the machine. However, this is not possible

with the On/Off switch 9 actuated.

Right Rotation: For drilling and driving in screws, push the

rotational direction switch 8 left to the stop.

The indicator for right rotation 4 lights up when the

On/Off switch 9 is actuated and the motor is running.

Left Rotation: For loosening or unscrewing screws, push the

rotational direction switch 8 right to the stop.

The indicator for left rotation 5 lights up when the

On/Off switch 9 is actuated and the motor is running.

Setting the Torque

The required torque can be preselected in 15 steps with the

torque preselection ring 3. With the correct setting, the insert

tool is stopped as soon as the screw is screwed flush into the

material or when the set torque is reached.

Select a higher setting when driving out screws, or set to the

symbol “Drilling”.

Drilling

The safety clutch is deactivated in the “Drilling” position.

Switching On and Off

To start the machine, press the On/Off switch 9 and keep it

pressed.

The power light 7 lights up when the On/Off switch 9 is slightly

or completely pressed, and allows the work area to be illumi-

nated when lighting conditions are insufficient.

To switch off the machine, release the On/Off switch 9.

Adjusting the Speed

The speed of the switched on power tool can be variably ad-

justed, depending on how far the On/Off switch 9 is pressed.

Light pressure on the On/Off switch 9 results in a low rotation-

al speed. Further pressure on the switch results in an increase

in speed.

Fully automatic spindle locking (Auto-lock)

When the On/Off switch 9 is not pressed, the drill spindle and

thus the tool holder are locked.

This enables screws to be screwed in, even when the battery

is empty and allows for the machine to be used as a screwdriv-

er.

Run-on Brake

When the On/Off switch 9 is released, the chuck brakes to a

stop, thus preventing the run-on of the tool.

When driving in screws, wait until the screw is screwed in

flush with the material and then release the On/Off switch 9.

By doing so, the head of the screw does not penetrate into the

material.

Temperature Dependent Overload Protection

When using as intended for, the power tool cannot be subject

to overload. When the load is too high or the allowable battery

temperature of 70 °C is exceeded, the electronic control

switches off the power tool until the temperature is in the op-

timum temperature range again.

Protection Against Deep Discharging

The lithium-ion battery is protected against deep discharging

by the “Electronic Cell Protection (ECP)”. When the battery is

empty, the machine is switched off by means of a protective

circuit: The inserted tool no longer rotates.

Working Advice

f Apply the power tool to the screw only when it is

switched off. Rotating tool inserts can slip off.

After longer periods of working at low speed, allow the ma-

chine to cool down by running it for approx. 3 minutes at max-

imum speed with no load.

For drilling in metal, use only perfectly sharpened HSS drill

bits (HSS=high-speed steel). The appropriate quality is guar-

anteed by the Bosch accessories program.

Before screwing larger, longer screws into hard materials, it is

advisable to predrill a pilot hole with the core diameter of the

thread to approx.

of the screw length.

Maintenance and Service

Maintenance and Cleaning

f Before any work on the machine itself (e. g. mainte-

nance, tool change, etc.) as well as during transport

and storage, remove the battery from the power tool.

There is danger of injury when unintentionally actuating

the On/Off switch.

f For safe and proper working, always keep the machine

and ventilation slots clean.

When the battery is no longer operative, please refer to an au-

thorised after-sales service agent for Bosch power tools.

If the machine should fail despite the care taken in manufac-

turing and testing procedures, repair should be carried out by

an after-sales service centre for Bosch power tools.

In all correspondence and spare parts order, please always in-

clude the 10-digit article number given on the type plate of

the machine.

After-sales Service and Customer Assistance

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Our customer service representatives can answer your ques-

tions concerning possible applications and adjustment of

products and accessories.

OBJ_BUCH-1533-001.book Page 7 Monday, August 22, 2011 5:17 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PSR 18 LI Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info