Bedienungsanleitung Bosch PSR12VE_2 (Seite 11 von 67) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

16917

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

English - 3

Fully Automatic Spindle Locking

(Auto-Lock)

The drill spindle is locked when the On/Off

switch 4 is not pressed.

This makes quick and easy changing of the tool

in the drill chuck possible.

Reversing the Rotational Direction

Operate the rotational direction

switch 5 only at a standstill.

The rotational direction

switch 5 is used to re-

verse the rotational direc-

tion of the machine. How-

ever, this is not possible

with the On/Off switch 4

actuated.

Right Rotation ( )

Turn the rotational direction switch through to the

left stop (normal operation: drilling, screwdriving,

etc.).

Left Rotation ( )

Press the rotational direction switch through to

the right stop (for loosening and unscrewing

screws and nuts).

Setting the Torque

With the correct setting, the clutch disengages as

soon as the screw is driven flush into the material

or the set torque is reached. Select a higher set-

ting when driving out screws, or set to the “Drill-

ing” symbol.

Low setting, e. g., small screws, soft

materials.

High setting, e. g., large screws, hard

materials.

Drilling

Set the torque setting ring 2 to the “Drill-

ing” symbol.

The display 10 is activated when the battery 7 is

inserted.

After a while the display switches to the stand-by

mode. The display 10 can be activated again by

inserting the battery 7 or by pressing one of the

two push-button keys on the display.

For temperatures below 0 °C the function of the

display is limited.

Warning Indicators (see figure )

The function of the warning indicators is also op-

erative in stand-by mode.

➊ The battery is almost empty:

➯ Recharge the battery.

➋

The motor is starting to overheat:

➯ Switch the machine off and allow to cool

down. Alternatively, run the machine at full

speed without load until the warning indicator

goes out.

Adjustment Aid

The display is for guidance. The settings are to

be checked by carrying out a practical test.

Material Selection (see figure )

Select the material to be worked by (multiple)

pressing of the left push-button key:

➌ Steel

➍ Softwood

➎ Hardwood

Shown in the example: Hardwood.

Application Selection (see figure )

Select the application by (multiple) pressing of

the right push-button key:

➏+➑ Driving in screws (4 Diameter ranges)

➐+➑ Drilling holes (2 Diameter ranges)

Recommendation (see figure )

The indication gives a recommendation for the

optimum setting of your cordless screwdriver. Ad-

just the proposed values on your cordless screw-

driver.

➒ 1st gear/2nd gear

➓ Torque range (Level 1 – 5, 5 – 15,

15 – 25, “Drilling”)

Shown in the example: 2nd gear; Torque

range 5 – 15.

Cordless Screwdriver Display

2 609 932 287 - Buch Seite 3 Mittwoch, 22. Oktober 2003 1:58 13

11 • 2 609 932 287 • 03.10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PSR12VE_2 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info