Bedienungsanleitung Bosch PSS 200 A (Seite 17 von 97) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

78692

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

English | 17

Bosch Power Tools 2 609 004 199 | (27.1.10)

Sanding sheets without holes, e. g. from rolls or

by the meter, can be punctured with the perfo-

rating tool 11 for use with dust extraction. For

this, press the machine with the mounted sand-

ing sheet onto the perforating tool

(see figure E).

To remove the sanding sheet 6, unlatch the

sanding-sheet clamp 4 and pull out the sanding

sheet.

Selecting the Sanding Sheet

Depending on the material to be worked and the

required rate of material removal, different

sanding sheets are available:

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Integrated Dust Extraction with Dust Box

(see figures C1–C4)

Attach the dust box 3 onto the extraction outlet

8 until it latches.

To empty the dust box 3, pull off the dust box

downward.

Before opening the dust box 3, it is recommend-

ed to loosen the dust from the filter element by

gently striking it against a firm support (as

shown in the figure).

Grasp the dust box 3 by the recessed grip, fold

the filter element 9 upward and empty the dust

box. Clean the thin plates of the filter element 9

with a soft brush.

External Dust Extraction (see figure D)

Insert a vacuum hose 10 onto the extraction out-

let 8. Connect the vacuum hose 10 to a vacuum

cleaner. See the overview for connecting to var-

ious vacuum cleaners at the end of these oper-

ating instructions.

The vacuum cleaner must be suitable for the ma-

terial being worked.

When vacuuming dry dust that is especially det-

rimental to health or carcinogenic, use a special

vacuum cleaner.

Grain size

For the working of all

wooden materials

40—240

For coarse-sanding,

e. g. of rough, un-

planed beams and

boards coarse 40, 60

For face sanding and

planing small irregu-

larities

medi-

um 80, 100, 120

For finish and fine

sanding of hard

woods fine 180, 240

For the working of

paint/enamel coats

or primers and fillers

40—320

For sanding off paint coarse 40, 60

For sanding primer medi-

um 80, 100, 120

For final sanding of

primers before coat-

ing fine 180, 240, 320

OBJ_BUCH-60-003.book Page 17 Wednesday, January 27, 2010 2:49 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PSS 200 A Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info