Bedienungsanleitung Bosch PST6500 (Seite 9 von 62) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

473387

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

English–2

2 609 932 166 • (03.03) T

Working safely with this machine is

possible only when the operating

and safety information are read

completely and the instructions con-

tained therein are strictly followed.

In addition, the general safety notes

in the enclosed booklet must be ob-

served.

Before using for the first time, ask for

a practical demonstration.

■

If the cable is damaged or cut through while work-

ing, do not touch the cable but immediately pull the

mains plug. Never use the machine with a dam-

aged cable.

■

Connect machines that are used in the open via a

residual current device (RCD) with an actuating

current of 30 mA maximum. Do not operate the

machine in rain or moisture.

■

Wear safety glasses.

■

Working with material containing asbestos is not

permitted.

■

Always direct the cable to the rear away from the

machine.

■

Secure the workpiece.

A workpiece clamped

with clamping devices or in a vice is held more se-

cure than by hand.

■

Apply the machine to the workpiece only when

switched on.

■

When working, never place a hand or fingers in

front of the saw blade.

■

The cutting path must be free of obstacles both

above and below.

■

When sawing, the complete surface of the base

plate

must be in secure contact.

■

For the working of smaller or thin workpieces, use

a stable foundation or a saw table (accessory).

■

Use only sharp, flawless saw blades. Replace im-

mediately cracked, bent or dull saw blades.

■

When the cut is completed, switch off the machine

and then pull the saw blade out of the cut only after

it has come to a standstill (danger of kick-back).

■

Always switch the machine off and wait until it has

come to a standstill before placing it down.

■

After switching off, do not brake the saw blade to a

stop by applying side pressure.

■

Never allow children to use the machine.

■

Bosch is able to ensure flawless functioning of the

machine only if the original accessories intended

for it are used.

■

Before any work on the machine itself, pull the

mains plug.

■

For inserting or changing the saw blade

, the

wearing of protective gloves is recommended.

Inserting the Saw Blade

Insert the saw blade (teeth in the cutting direction) into

the stroke rod

until it latches. The SDS clamping

lever

springs to the rear and locks the saw blade.

Take care when inserting the saw blade that the rear

edge of the saw blade rests in the groove of the guide

roller

Ejecting the Saw Blade

To eject the saw blade, turn the SDS lever

to the

front in the insertion position. The saw blade is re-

leased and ejected.

■

Dust produced while working can be detrimental to

health, inflammable or explosive. Suitable protec-

tion measures are required.

Examples: Some dusts are considered to be carci-

nogenic. Use suitable dust/chip extraction and

wear a dust protection mask.

■

Light metal dust can burn or explode. Always keep

the work place clean since material mixtures are

especially dangerous.

Cover Guard

When using a vacuum cleaner, always mount the dust

cover

and slide it completely downward.

Attaching:

Insert the cover guard from above into

the guide and slide downward until it

latches.

Removing:

Take hold of the cover guard on the sides

and pull off in the upward direction.

Connection for a Vacuum Cleaner

(Accessory pages)

Connect the vacuuming hose (19 mm dia., accessory)

directly to the blow-out opening

The vacuum cleaner must be suitable for the material

to be worked.

When vacuuming dry dust that is especially detrimen-

tal to health or carcinogenic, use a special vacuum

cleaner.

For Your Safety

Inserting/Changing the

Saw Blade

Dust/Chip Vacuuming

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PST6500 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info