Bedienungsanleitung Bosch PTA 2000 (Seite 12 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544044

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

12 | English

1 619 929 K24 | (28.3.12) Bosch Power Tools

f Mount and dismount the power tool only when it is in

the transport position (for instructions on the trans-

port position, also see the operating instructions of the

respective power tool). Otherwise, the power tool can

have such an unfavourable centre of gravity that it cannot

be held securely.

f Ensure that long and heavy workpieces do not affect

the equilibrium of the saw stand. Long and heavy work-

pieces must be supported at the free end (e. g., with the

Bosch PTA 1000 roller stand).

f Keep your fingers clear of the hinge points while set-

ting up or folding together the saw stand. Danger of fin-

gers being crushed or contused.

Symbols

The following symbols can be important for the operation of

your saw stand. Please memorise the symbols and their

meanings. The correct interpretation of the symbols helps

you operate the saw stand better and more secure.

Product Description and

Specifications

Intended Use

The saw stand is intended to accommodate the following sta-

tionary saws from Bosch (as of 2012.02):

Together with the power tool, the saw stand is intended for

the cutting to length of boards and profiles.

Product Features

The numbering of the product features refers to the illustra-

tion of the saw stand on the graphics pages.

1 Handle

2 Lock/release button

3 Cross brace

4 Retaining adapter

5 Locking knob

6 Resting bar

7 Transport wheels

8 Transport handle

9 Fastening kit, power tool

10 Limit bolt of the resting bar

Accessories shown or described are not part of the standard deliv-

ery scope of the product. A complete overview of accessories can

be found in our accessories program.

Technical Data

Symbol Meaning

The maximum carrying capacity (power

tool + workpiece) of the saw stand is

125 kg.

Mount the power tool only as shown in the

corresponding figure.

(seefiguresB1–B2)

Observe the operating position. When

working, always position yourself on the

side of the wheels. (see figure C)

f Do not overload the saw stand and

do not use it as a ladder or scaffold-

ing. Overloading or standing on the

saw stand can lead to the upward shift-

ing of the centre of gravity of the stand

and its tipping over.

Indicates the individual steps for setting up the saw stand.

1. Pull the release button

2. Step on the transport handle and pull the handle upward

3. Firmly tighten the locking knob

Indicates the individual steps for folding the saw stand to-

gether.

1. Loosen the locking knob

2. Pull the handle upward a little

3. Pull the release button

4. Slowly lower the saw stand by the handle

– PPS 7S 3 603 M03 3..

– PTS 10 3603L032..

Saw stand PTA 2000

Article number

3 603 M05 300

Height of saw stand

mm 595

Max. carrying capacity

(power tool + workpiece)

kg 125

Weight according to

EPTA-Procedure 01/2003

kg 13

Symbol Meaning

OBJ_BUCH-1563-002.book Page 12 Wednesday, March 28, 2012 1:05 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PTA 2000 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info