Bedienungsanleitung Bosch PVQ651FC5E (Seite 23 von 32) (Englisch)

746100

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

en Basic settings

--------

To access the basic settings:

The hob must be off.

1. Switch on the hob.

2. Within ten seconds, touch and hold the 0 symbol

for approximately four seconds.

The first four displays provide product information.

Touch the settings area to view the individual

displays.

3. Touching the 0 symbol again takes you to the basic

settings.

™ and ‚ flash alternately on the displays and ‹

appears as a presetting.

4. Touch the 0 symbol repeatedly until the required

function is displayed.

5. Then select the required setting from the settings

area.

6. Touch the 0 symbol for at least four seconds.

The settings have been saved.

Leaving the basic settings

Turn off the hob with the main switch.

™‹

Restore to standard settings

‹ Individual settings.*

‚ Restore factory settings.

*Factory setting

**The hob's maximum power output is shown on the rating plate.

Product information Display screen

After-sales service index (ASSI)

‹‚

Production number

”š

Production number 1

Š†.

Production number 2

‹.†

Energy consumption indicator en

[Energy consumption

indicator

Ener gy cons umpt i on i ndi cat or

This function indicates the total amount of energy

consumed by this hob the last time it was used for

cooking.

Once the hob is switched off, the energy consumption

is displayed in kilowatt hours (e.g.

‚.‹‰ kWh) for 10

seconds.

The accuracy of the information displayed depends on

the voltage quality of the mains power supply, among

other factors.

You can find out how to switch this function on in the

section on ~ "Basic settings"

tCookware check

Cook war e check

This function can be used to check the speed and

quality of the cooking process depending on the

cookware.

The result is a reference value and depends on the

properties of the cookware and the hotplate being used.

1. With the cookware still cold, fill it with approx.

200 ml of water and place it on the centre of the

hotplate with the diameter that most closely matches

that of the base of the cookware.

2. Go to the basic settings and select the ™‚ƒ setting.

3. Touch the settings range. A will flash on the hotplate

display.

The function has now been activated.

After 10 seconds, the result for the quality and speed of

the cooking process will appear on the hotplate display.

Check the result using the following table:

To reactivate this function, touch the settings range.

Notes

■ If the diameter of the hotplate used is much smaller

than the diameter of the cookware, only the middle

of the cookware can be expected to heat up. This

may result in the cooking results not being as good

as expected or being less than satisfactory.

■ You can find information on this function in the

section on ~ "Basic settings".

■ You can find information on the type, size and

positioning of the cookware in the section on

~ "Induction cooking".

Result

‹

The cookware is not suitable for the hotplate and will therefore

not heat up.*

‚

The cookware is taking longer to heat up than expected and the

cooking process is not going as well as it should.*

The cookware is heating up correctly and the cooking process

is going well.

* If there is a smaller hotplate available, test the cookware again on the

smaller hotplate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PVQ651FC5E Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PVQ651FC5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info