Bedienungsanleitung Bosch PVQ811F15E (Seite 17 von 36) (Englisch)

745998

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

en Operating the appliance

Manual hood control

You can control the ventilation setting manually.

Note: Using tall items of cookware may prevent the

extraction system from working at optimum power. The

extraction power can be improved by placing a lid on

the cookware at an angle.

Activation

1. Touch the : symbol.

The ventilation system starts at the preset power

level.

2. Within the next 10 seconds, select the required

power level in the settings area.

The selected power level lights up.

3. Touch the : symbol to confirm the selected setting.

The ventilation system switched on.

Changing and switching off

Touch the : symbol and select the required power

level or set it to ‹ in the settings area.

Intensive setting

There are two intensive modes for the ventilation

system. If you activate the intensive settings, the

ventilation system works at maximum output for a short

time.

Activation

Touch the : symbol and select the required intensive

setting.

■Intensive setting I : Select the power level Š and

then touch the Boost G symbol. The › display lights

up. The intensive setting is activated.

■Intensive setting II : Touch the Boost G symbol

again. The › display lights up. The intensive setting

is activated.

Note: After eight minutes, the appliance automatically

switches back to fan setting Š.

Changing and switching off

Touch the : symbol and select the required power

level or set it to ‹ in the settings area.

Automatic start

If you select a power level for a cooking zone, the

automatic start switches on. The ventilation system

switches on at a power level in accordance with the

respective power level for the cooking zones.

You can find out how to change this setting in section

~ "Basic settings".

Run-on function

The run-on function allows the ventilation system to

continue operating for a few minutes after the hob has

been switched off. This removes any remaining cooking

vapours. The ventilation system then automatically

switches off.

Activation

As standard, the run-on time is activated with a

maximum switch-off time. You can find out how to

change this setting in section ~ "Basic settings".

Note: The run-on function only switches on if at least

one cooking zone has been switched on for at least one

minute.

Deactivating

Manual

Touch the : symbol. The run-on function is switched

off.

Automatic

The run-on function is switched off in the following

cases:

■The run-on time has elapsed.

■The appliance is switched on again.

CombiZone function en

wCombiZone function

Co mbi Zone f unct i on

You can use this function to connect the Combi zone

and set the same heat setting for both cooking zones.

This is especially suitable for cooking with oblong

cookware.

Notes regarding cookware

For best results, use cookware that matches the size of

the two cooking zones. Place the cookware in the

centre of the cooking zones.

If you are using only one piece of cookware on one of

the two cooking zones, you can move it to the second

cooking zone. If you do this, the heat setting and the

selected settings are transferred.

Activation

The hob must be switched on.

1. Select one of the two hotplates which are included in

the combi zone and set the heat setting.

2. Touch the ú symbol. The Ú indicator lights up.

The heat setting appears in the display for the lower

hotplate.

The function is activated.

Changing the heat setting

Select one of the two hotplates in the Combi zone and

change the heat setting in the setting range.

Deactivating

Select one of the two hotplates assigned to this function

and touch the ú symbol.

The function has been deactivated. The two hotplates

will now function independently.

uMove function

Move f unct i on

You can use this function to connect the Combi zone

and select different heat settings for the two cooking

zones. Default heat settings:

Front cooking zone = heat setting Š

Rear cooking zone = heat setting ‚.

The heat settings for each cooking zone can be

changed independently of one another.

Notes

■Only place cookware on one of the hotplates. The

function will not be activated if there is cookware on

each of the two hotplates.

■The heat setting is less brightly lit on the display for

the hotplate on which there is no cookware. It will not

be activated until the cookware is moved to this

hotplate and is detected.

■If the function has already been activated and a

second piece of cookware is placed on the free

hotplate, the display lights up less brightly, as

before. The hotplate is not active. The hotplate is

activated when the first piece of cookware is

removed.

Advice on using cookware

To ensure that the cookware is detected and heat is

distributed evenly, correctly centre the cookware:

Only use one piece of cookware that only covers one of

the cooking zones.

Move the cookware from one cooking zone to another:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PVQ811F15E Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PVQ811F15E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info