78609
18
Zoom out
Zoom in
Vorherige Seite
1/120
Nächste Seite
1 609 929 M21 | (22/8/07) Bosch Power Tools
18 | English
Safety Warnings for Operation without
Base Unit
f When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
f Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
f Apply the machine to the workpiece only
when switched on and switch the machine
off only after it has been lifted away from
the workpiece. The power tool can move sud-
denly.
f Always wait until the machine has come to a
complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Safety Warnings for Operation with Base
Unit
f Connect the machine securely to the base
unit and fasten it firmly against movement.
The machine can move suddenly.
f The On/Off switch must be well-accessible
at all times. Switching off the machine easily
must be possible at all times.
f Guide the workpiece only against the
switched-on machine and do not switch the
machine off until after having removed the
workpiece. The workpiece can move sudden-
ly.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Intended Use
The machine is intended for dry sanding of wood,
plastic and metal with high removal rates. It is
particularly suitable for the machining of profiles,
corners or hard-to-reach areas.
Product Features
The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Vacuum connection
2 Thumbwheel for belt speed preselection
3 On/Off switch
4 Sanding belt
5 Adjustment knob for belt run
6 Clamping lever for sanding belt
7 Venting slots
8 Auxiliary handle*
9 Bolt hole
10 Sliding shoe
11 Guide roller
12 Tensioning roller
13 Openings
14 Base unit*
15 Stop rail
16 Quick-action clamp*
17 Guide bolt(4x)
18 Wing bolt
19 Screw
20 Stop
21 Plastic guide
22 Groove for stop 20 as parallel guide
23 Groove for stop 20 as angle guide
*The accessories illustrated or described are not in-
cluded as standard delivery.
OBJ_BUCH-472-001.book Page 18 Wednesday, August 22, 2007 5:20 PM
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch PVS 300 AE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info