Bedienungsanleitung Bosch PWP631BF1B (Seite 19 von 28) (Englisch)

746108

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

en Cookware check

tCookware check

Co o k wa r e c hec k

This function can be used to check the speed and

quality of the cooking process depending on the

cookware.

The result is a reference value and depends on the

properties of the cookware and the hotplate being used.

1. Place a cold saucepan containing approx. 200 ml of

water in the centre of the hotplate the diameter of

which matches the base of the pan most closely.

2. Go to the basic settings and select the ™‚ ƒ setting.

3. Touch the @ or A symbol. A will flash on the hotplate

display.

The function has now been enabled.

After 20 seconds, the quality and speed of the cooking

process will appear in the hotplate display.

Check the result using the following table:

To activate the function again, select the

@ or A symbol.

Notes

■ If the diameter of the hotplate used is much smaller

than the diameter of the cookware, only the middle

of the cookware can be expected to heat up. This

may result in the cooking results not being as good

as expected or being less than satisfactory.

■ You can find information on this function in the

section on ~ "Basic settings".

■ You can find information on the type, size and

positioning of the cookware in the section on

~ "Induction cooking".

hPower manager

Power manager

You can use the power manager function to set the

total power of the hob.

The hob settings are preconfigured at the factory. Its

maximum performance is specified on the rating plate.

You can use the power manager function to change the

value to meet the requirements of the specific electrical

installation.

In order not to exceed this set value, the hob

automatically distributes the power available according

to need between the cooking zones that are switched

on.

While the power manager function is activated, the

output of a cooking zone may temporarily fall below the

nominal value. If a cooking zone is switched on and the

power limit is reached,

¬ appears in the power level

display for a short time. The appliance automatically

regulates and selects the highest possible power level.

Note: If automatic power limitation has been activated,

the appliance self-regulates but continues to display the

selected power level unchanged.

For more information about how the total power of the

hob is changed, see the section entitled ~ "Basic

settings"

Result

‹

The cookware is not suitable for the hotplate and will therefore

not heat up.*

‚

The cookware is taking longer to heat up than expected and the

cooking process is not going as well as it should.*

The cookware is heating up correctly and the cooking process

is going well.

* If there is a smaller hotplate available, test the cookware again on the

smaller hotplate.

Cleaning en

DCleaning

Cl eani ng

Suitable maintenance and cleaning products can be

purchased from the after-sales service or in our e-Shop.

Hob

Cleaning

Always clean the hob after cooking. This will prevent

food deposits from becoming burned on. Only clean the

hob after the residual heat indicator has gone out.

Clean the hob with a damp dish cloth and dry it with a

cloth or towel to prevent limescale build-up.

Only use cleaning agents that are suitable for this type

of hob. Observe the manufacturer's instructions on the

product packaging.

Never use:

■ Undiluted washing-up liquid

■ Cleaning agents designed for dishwashers

■ Abrasive cleaners

■ Harsh cleaning agents, such as oven spray and

limescale remover

■ Scouring pads

■ High-pressure cleaners or steam jet cleaners

Stubborn dirt is best removed with a glass scraper,

available from retailers. Observe the manufacturer's

instructions.

You can obtain a suitable glass scraper from customer

services or through our online shop.

Using a special sponge for cleaning glass-ceramic

hobs achieves a great cleaning result.

Note: Do not use any cleaning agents while the hob is

still hot. This may mark the surface. Make sure that any

residue left by cleaning agents is removed.

Hob surround

To prevent damage to the hob surround, observe the

following instructions:

■ Only use warm soapy water

■ Wash new dish cloths thoroughly before use.

■ Do not use harsh or abrasive cleaning agents.

■ Do not use a glass scraper or sharp objects.

Potential marks

Limescale and water

marks

Clean the hob as soon as it has cooled down.

You can use a cleaning agent suitable for

glass-ceramic hobs.*

Sugar, rice starch or

plastic

Clean immediately. Use a glass scraper. Cau-

tion: Risk of burns.*

* Then clean with a damp dish cloth and dry with a cloth or towel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PWP631BF1B Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PWP631BF1B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info