79294
25
Zoom out
Zoom in
Vorherige Seite
1/166
Nächste Seite
English | 25
Bosch Power Tools 1 609 929 R16 | (14.2.08)
Technical Data
Declaration of Conformity
We declare under our sole responsibility that
the product described under “Technical Data” is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
28.01.2008, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Assembly
Mounting the Protective Devices
f Before any work on the machine itself, pull
the mains plug.
Protection Guard for Sanding
Place the protection guard 6 onto the spindle
collar of the machine until the encoding keys of
the protection guard agree with the spindle col-
lar. Press and hold the release lever 1while do-
ing this.
Press the protection guard 6 onto the spindle
collar until the shoulder of the protection guard
is seated against the flange of the machine, and
turn the protection guard until it can clearly be
heard to engage.
Adjust the position of the protection guard 6 to
the requirements of the work process. For this,
press the release lever 1 upward and turn the
protection guard 6 to the required position.
f Adjust the protection guard 6 in such a man-
ner that sparking is prevented in the direc-
tion of the operator.
f The protection guard 6 may be turned only
upon actuation of the release lever 1! Oth-
erwise the power tool may not continue to
be used under any circumstances and must
be taken to an after-sales service agent.
Note: The encoding keys on the protection
guard 6 ensure that only a protection guard that
fits the machine type can be mounted.
Angle Grinder PWS ... 700-115 720-115 720-125 750-115 750-125
Article number
3 603 ... A64 2.. A64 0.. A64 0.. A64 1.. A64 1..
Rated power input
W705720 720 750 750
Output power
W380360 360 450 450
No-load speed
rpm 11000 11000 11000 11000 11000
Grinding disc diameter, max.
mm 115 115 125 115 125
Thread of grinder spindle
M 14 M 14 M 14 M 14 M 14
Weight according to
EPTA-Procedure 01/2003
kg 1.9 1.9 1.9 1.9 1.9
Protection class
/II /II /II /II /II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-393-003.book Page 25 Thursday, February 14, 2008 3:56 PM
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

bosch-pws-720-115

Suche zurücksetzen

  • wie kann ich schleifscheiben beim Bosch PWS 720-115 wechseln
    scheibenwechsel beim pws 720-115 Eingereicht am 28-12-2017 10:48

    Antworten Frage melden
  • wie kann ich schleifscheiben beim Bosch PWS 720-115 wechseln
    Eingereicht am 28-12-2017 10:39

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch PWS 720-115 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bosch PWS 720-115

Bosch PWS 720-115 Bedienungsanleitung - Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch - 167 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info