Bedienungsanleitung Bosch PWS 750-125 (Seite 24 von 167) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

78344

Zoom out

Zoom in

Vorherige Seite

1/167

Nächste Seite

24 | English

1 609 929 R16 | (28.9.09) Bosch Power Tools

Functional Description

Read all safety warnings and all in-

structions. Failure to follow the

warnings and instructions may re-

sult in electric shock, fire and/or se-

rious injury.

Intended Use

The machine is intended for cutting, roughing,

and brushing metal and stone materials without

using water.

For cutting metal, a special protection guard for

cutting (accessory) must be used.

For cutting stone, a special extraction hood for

cutting with cutting guide (accessory) must be

used.

With approved sanding tools, the machine can

be used for sanding with sanding discs.

Product Features

The numbering of the product features refers to

the illustration of the machine on the graphics

page.

1 Release lever for protection guard

2 Spindle lock button

3 On/Off switch

4 Auxiliary handle (insulated gripping surface)

5 Grinder spindle

6 Protection guard for grinding*

7 Protection guard for cutting*

8 Mounting flange

9 Grinding/cutting disc*

10 Clamping nut

11 Hand guard*

12 Rubber sanding plate*

13 Sanding sheet*

14 Round nut*

15 Cup brush*

16 Cutting guide with dust extraction

protection guard*

17 Diamond cutting disc*

18 Handle (insulated gripping surface)

*Accessories shown or described are not part of the

standard delivery scope of the product. A complete

overview of accessories can be found in our acces-

sories program.

Noise/Vibration Information

Measured sound values determined according

to EN 60745.

Typically the A-weighted noise levels of the

product are: Sound pressure level 88 dB(A);

Sound power level 99 dB(A). Uncertainty

K=1.5dB.

Wear hearing protection!

Vibration total values (triax vector sum) deter-

mined according to EN 60745:

Surface grinding: Vibration emission value

=12 m/s

, Uncertainty K=1.5 m/s

Disk sanding: Vibration emission value

=4.5 m/s

, Uncertainty K=1.5 m/s

The vibration emission level given in this infor-

mation sheet has been measured in accordance

with a standardised test given in EN 60745 and

may be used to compare one tool with another.

It may be used for a preliminary assessment of

exposure.

The declared vibration emission level repre-

sents the main applications of the tool. However

if the tool is used for different applications, with

different accessories or poorly maintained, the

vibration emission may differ. This may signifi-

cantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibra-

tion should also take into account the times

when the tool is switched off or when it is run-

ning but not actually doing the job. This may sig-

nificantly reduce the exposure level over the to-

tal working period.

Identify additional safety measures to protect

the operator from the effects of vibration such

as: maintain the tool and the accessories, keep

the hands warm, organisation of work patterns.

OBJ_BUCH-393-004.book Page 24 Monday, September 28, 2009 2:16 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PWS 750-125 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PWS 750-125

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info