Bedienungsanleitung Bosch PXE651FC1E (Seite 14 von 28) (Englisch)

746072

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

en Time-setting options

OTime-setting options

Time-setting options

Your hob has two timer functions:

■ Programming the cooking time

■ Kitchen timer

Programming the cooking time

The hotplate automatically switches off after the time

that is set has elapsed.

Setting procedure:

1. Select the hotplate and the required heat setting.

2. Touch the 0 symbol. x lights up on the display for

the hotplate.‹‹ lights up on the timer display.

3. Within the next 10 seconds, set the required cooking

time in the settings range.

After a few seconds, the time begins to elapse.

Notes

■ The same cooking time can be set automatically for

all hotplates. The set time for each of the hotplates

counts down independently.

You can find information on automatically

programming the cooking time in section ~ "Basic

settings"

■ If the flexible cooking zone is selected as the only

hotplate, the set time for the entire cooking zone is

the same.

Frying sensor

If a cooking time has been programmed for a hotplate

and the frying sensor has been activated, the cooking

time will not begin to count down until the selected

temperature setting has been reached.

Changing or cancelling the time

Select the hotplate and then press the 0 symbol.

Change the cooking time using the programming zone

or set to ‹‹ in order to cancel the time.

Once the time has elapsed

The hotplate switches off. A warning signal sounds. The

time program function lights up ‹‹ for 10 seconds in

the display.

When the 0 symbol is pressed, the indications turn off

and the beeping stops.

Notes

■ To set a cooking time of under 10 minutes, always

touch 0 before you select the required value.

■ If a cooking time was programmed for several

hotplates, the time information for the selected

hotplate is shown in the timer display.

■ Select the relevant hotplate to call up the remaining

cooking time.

■ You can set a cooking time of up to ŠŠ minutes.

The kitchen timer

You can use the kitchen timer to set a time of up to 99

minutes.

This functions independently from the hotplates and

from other settings. This function does not automatically

switch off a hotplate.

Setting

1. Touch the 0 symbol repeatedly until the V

indicator lights up. ‹‹ lights up on the timer display.

2. Set the desired time in the settings area.

After a few seconds, the time begins to elapse.

Changing or deleting the time

Touch the 0 symbol repeatedly until the V indicator

lights up.

Change the time in the settings area or set ‹‹ in order

to delete the programmed time.

When the time has elapsed

An audible signal sounds. ‹‹ appears on the timer

display and the V indicator lights up. The displays go

out after 10 seconds.

When the 0 symbol is touched, the displays go out

and the audible signal ceases.

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PXE651FC1E Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PXE651FC1E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info