en Time-setting options
16
OTime-setting options
Ti me- s et t i ng opt i ons
Your hob has three timer functions:
■Programming the cooking time
■Kitchen timer
■Stopwatch function
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
1. Select the hotplate and the required heat setting.
2. Touch the y symbol. The ‹‹ symbol and the V
indicator light up in the timer display.
y lights up in the display for the hotplate.
3. Within the next 10 seconds, set the required cooking
time in the settings range.
4. Touch the y symbol to confirm the selected setting.
The cooking time begins to elapse.
Notes
■The same cooking time can be set automatically for
all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically
programming the cooking time in section ~ "Basic
settings"
■If the flexible cooking zone is selected as the only
hotplate, the set time for the entire cooking zone is
the same.
■If the Move function is selected for the combined
hotplate, the set time for the three hotplates is the
same.
Frying sensor
If a cooking time has been programmed for a hotplate
and the frying sensor has been activated, the cooking
time will not begin to count down until the selected
temperature setting has been reached.
Changing or deleting the time
Select the hotplate and then touch the y symbol.
Change the cooking time in the settings range or set
‹‹ to delete the programmed cooking time.
Touch the y symbol to confirm the selected setting.
When the time has elapsed
The hotplate switches off, the y display flashes and
the hotplate switches to the ‹‹ heat setting. An audible
signal sounds.
‹‹ and the V indicator flash in the timer display.
When the y symbol is touched, the indicators go out
and the acoustic signal ceases.
Notes
■To set a cooking time of under 10 minutes, always
touch 0 before you select the required value.
■If a cooking time was programmed for several
hotplates, the time information for the selected
hotplate is shown in the timer display.
■Select the relevant hotplate to call up the remaining
cooking time.
■You can set a cooking time of up to ŠŠ minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure
1. Touch the t symbol. The ‹‹ symbol and the V
indicator light up in the timer display.
2. Select the required time on the control panel and
touch the t symbol to confirm.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the Y symbol.
Change the cooking time in the settings range or set
‹‹ to delete the programmed cooking time.
Touch the Y symbol to confirm the selected setting.
When the time has elapsed
An audible signal sounds once the time has elapsed.
‹‹ and the V symbol flash in the timer display.
The indicators go out after touching the t symbol.
elapsed since activation.
from other settings. This function does not automatically
switch off a hotplate.
indicator light up in the timer display.
The cooking time begins to elapse.
The timer displays remain lit.
The function is deactivated.
use (see illustration).
single hotplate.
1. Select a hotplate.
2. Touch the á symbol.
The function is activated.
1. Select a hotplate.
2. Touch the á symbol.
The function is deactivated.
protect the electronic elements inside the hob.
