Bedienungsanleitung Bosch PXV895DV5E (Seite 11 von 44) (Englisch)

746061

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

en Getting to know your appliance

The hotplates

Residual heat indicator

The hob has a residual heat indicator for each hotplate.

This indicates that a hotplate is still hot. Do not touch a

hotplate while the residual heat indicator is lit up.

The following indicators are shown depending on the

amount of residual heat:

■Display •: High temperature

■Display œ: Low temperature

If you remove the cookware from the hotplate during

cooking, the residual heat indicator and the selected

heat setting will flash alternately.

When the hotplate is switched off, the residual heat

indicator will light up. Even after the hob has been

switched off, the residual heat indicator will stay lit for as

long as the hotplate is still warm.

Hotplates

$ / ÛSimple hotplate Use cookware that is a suitable size.

áFlexible cooking zone See section ~ "Flex Zone"

Only use cookware that is suitable for induction cooking; see section ~ "Induction cooking"

Operating the appliance en

1Operating the appliance

Oper at i ng t he appl i ance

This chapter explains how to set a hotplate. The table

shows heat settings and cooking times for various

meals.

Switching the hob on and off

Use the main switch to switch the hob on and off.

When you first switch on the appliance, you will be

prompted to set up your home network. The D symbol

will be lit dimly for a few seconds on the display panel.

To begin setting up the connection, touch the

D sensor and proceed in accordance with the

information given in the section entitled ~ "Home

Connect".To exit initial set-up, touch any sensor.

To switch the hob on and off, touch the # symbol. An

audible signal will sound. The symbols for the cooking

zones and the functions available at this time will light

up. ‹.‹. will be lit next to the cooking zones. The hob is

ready to use.

To switch the hob off, touch and hold the # symbol

until all indicators go out. The residual heat indicator will

remain lit until the cooking zones have cooled down

sufficiently.

Notes

■If the appliance has not been connected to your

home network or the connection has been broken,

network connection initial set-up will be activated

whenever you switch on the hob.

■The hob will automatically switch itself off if the

cooking zones have been switched off for a few

seconds.

■The settings are stored for 4 seconds after the hob

has been switched off. If you switch the hob back on

during this time, the hob will operate using the

stored settings.

Setting a hotplate

Set the required heat setting using the ò to ê symbols.

Heat setting ò = lowest setting.

Heat setting ê = highest setting.

Every heat setting has an intermediate setting. This is

marked in the control panel with the Ê symbol.

Notes

■To protect the fragile parts of your appliance from

overheating and electrical overloading, the hob may

temporarily reduce the power.

■In order to prevent the appliance from producing

excess noise, the hob may temporarily reduce the

power.

Selecting a hotplate and heat setting

The hob must be switched on.

1. Touch the ø/ã symbol for the required hotplate.

The ‹.‹ display gets brighter.

2. Then select the required heat setting from the

settings range.

The heat setting is set.

Changing the heat setting

Select the hotplate and then set the required heat

setting in the control panel.

Switching off the hotplate

Select the hotplate and set it to ‹.‹ in the settings

range. The hotplate switches itself off and the residual

heat indicator appears.

Notes

■If no pan has been placed on the hotplate, the

selected power level flashes. After a certain time has

elapsed, the hotplate switches off.

■If a pan has been placed on the hotplate before

switching on the hob, it will be detected within

20 seconds of pressing the main switch and the

hotplate will be selected automatically. Once

detected, select the power level within the next

20 seconds or the hotplate will switch off.

If more than one pan is placed on the hob, only one

will be detected when switching it on.

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PXV895DV5E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PXV895DV5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info