Bedienungsanleitung Bosch PXV895DV5E (Seite 15 von 44) (Englisch)

746061

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

en Flex Zone

|Flex Zone

Fl e x Zone

You can use each flex zone as a single hotplate or as

two independent hotplates, as required.

It consists of four inductors that work independently of

each other. If using the flexible cooking zone, only the

area that is covered by cookware is activated.

Advice on using cookware

To ensure that the cookware is detected and heat is

distributed evenly, correctly centre the cookware:

As two independent hotplates

The flexible cooking zone is used like two independent

hotplates.

Activating

See section ~ "Operating the appliance"

As a single hotplate

Using the entire cooking zone by connecting both

hotplates.

Linking the two hotplates

1. Set down the cookware. Select one of the two

hotplates assigned to the flexible cooking zone and

set the heat setting.

2. Touch the è symbol. The display lights up.

The heat setting appears in the display for the lower

hotplate.

The flexible cooking zone is activated.

Changing the heat setting

Select one of the two hotplates in the flexible cooking

zone and change the heat setting in the settings range.

Adding a new item of cookware

Set the new item of cookware down on the cooker,

select one of the two hotplates in the flexible cooking

zone and then touch the è symbol twice. The new item

of cookware will be detected and the heat setting that

was previously selected will be retained.

Note: If the cookware is moved to the hotplate being

used or lifted up, the hotplate begins an automatic

search and the heat setting selected previously is

retained.

Disconnecting the two hotplates

Select one of the two hotplates in the flexible cooking

zone and touch the è symbol.

This deactivates the flexible cooking zone. The two

hotplates will now function independently.

Notes

■If the hob is switched off, and then switched back on

again later, the flexible cooking zone is reset to

function as two independent hotplates.

■To change the configuration settings for the flexible

cooking zone, refer to section ~ "Basic settings".

As a single hotplate

Diameter smaller than or equal to 13 cm

Place the cookware on one of the four posi-

tions that can be seen in the illustration.

Diameter greater than 13 cm

Place the cookware on one of the three

positions that can be seen in the illustration.

If the cookware takes up more than one

hotplate, place it starting on the upper or

lower edge of the flexible cooking zone.

As two independent hotplates

The front and rear hotplates each have two induc-

tors and can be used independently of each other.

Select the required heat setting for each of the

hotplates. Use only one item of cookware on each

hotplate.

Move function en

uMove function

Move f unct i on

This function activates the entire flexible cooking zone,

which is divided into three cooking areas and which has

preset heat settings.

Only use one item of cookware. The size of the cooking

area depends on the cookware used and whether it is

positioned correctly.

This means that an item of cookware can be moved

during the cooking process to another cooking area

with another heat setting:

Preset heat settings:

Front area = heat setting Š

Middle area = heat setting †

Rear area = heat setting ‚.†

The preset heat settings can be changed independently

of one another. You can find out how to change these in

the section on ~ "Basic settings".

Notes

■If more than one item of cookware is detected on the

flexible cooking zone, the function is deactivated.

■If the cookware is moved within the flexible cooking

zone or lifted up, the hob automatically starts

searching and the heat setting of the area in which

the vessel was detected is set.

■You can find information on the size and positioning

of the cookware in the section on ~ "Flex Zone"

Activation

1. Select one of the two hotplates in the flexible

cooking zone.

2. Touch the ç symbol. The indicator beside the

ç symbol lights up. The flexible cooking zone is

activated as a single hotplate.

The heat setting in the area in which the cookware is

located lights up in the hotplate display.

The function has now been activated.

Changing the heat setting

The heat settings for the individual cooking areas can

be changed during the cooking process. Set the

cookware down on the cooking area and change the

heat setting in the settings range.

Notes

■Only the heat setting in the area in which the

cookware is located is changed.

■If the function is deactivated, the heat settings for the

three cooking areas are reset to the preset values.

Deactivating

Touch the ç symbol. The indicator beside the

ç symbol goes out.

The function was deactivated.

Note: If one of the cooking areas is set to ‹, the

function deactivates after a few seconds.

Cooking areas

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PXV895DV5E Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PXV895DV5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info