Bedienungsanleitung Bosch PXX975DC1E (Seite 33 von 44) (Englisch)

746096

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Home Connect en

Disconnecting from the network

Di sc onnect i ng from the net wor k

You can disconnect your hob from the network at any

time.

Note:

If your hob is disconnected from the network, it is not

possible to operate it using Home Connect.

1. Switch on the hob.

2. Touch and hold the t symbol for four seconds.

The product information is displayed.

3. Touch the t symbol repeatedly until •’ and ‚ are

displayed alternately.

„ lights up in the cooking position display.

4. Set the ‹ value on the control panel.

This disconnects the appliance from your home

network; the D symbol will go out on the control panel.

Connecting to the network

Connec t i ng to the net wor k

1. Switch on the hob.

2. Touch and hold the t symbol for four seconds.

The product information is displayed.

3. Touch the t symbol repeatedly until •’ and ‚ are

displayed alternately.

‹ lights up in the cooking position display.

4. On the control panel

set the "Connect automatically" ‚ value or

or the "Connect manually" ƒ value.

5. Follow the instructions as per ~ "Automatic

registration in the home network" or ~ "Manual

registration in the home network".

Connect to the app

If the Home Connect app is installed on your mobile

device, you can connect it to your hob.

Notes

■The appliance must be connected to the network.

■The app must be open and be set up.

■If your extractor hood is directly connected, first

disconnect the hob from your home network and

then initiate the connection process

again.~ "Disconnecting from the network"

on page 33~ "Connecting to the network"

on page 33

1. Switch on the hob.

2. Touch and hold the t symbol for four seconds.

The product information is displayed.

3. Touch the t symbol repeatedly until •’ and ƒ are

displayed alternately.

‹ lights up in the cooking position display.

4. Set the ‚ value on the control panel.

5. Follow the instructions in the app to complete the

connection process.

Settings via app

Using the Home Connect app, you can easily access

the basic settings for your hob and send settings for the

cooking zones to the hob.

Notes

■Before you can change the basic settings, the hob

must be switched off.

■If the appliance is being operated by means of the

controls on the appliance itself, this mode of

operation always has priority. During this time, it is

not possible to operate the appliance using the

Home Connect app.

■When the appliance is delivered, the settings

transmission option is already activated by default.

■If the settings transmission option has been

deactivated, only the hob's operating statuses will be

displayed in the Home Connect app.

1. Switch on the hob.

2. Touch and hold the t symbol for four seconds.

The product information is displayed.

3. Touch the t symbol repeatedly until •’ and … are

displayed alternately.

4. To activate the transfer, select the ‚ value on the

control panel. To deactivate the transfer, select the ‹

value.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PXX975DC1E Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PXX975DC1E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info