Bedienungsanleitung Bosch PXX975DC1E (Seite 36 von 44) (Englisch)

746096

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

en Hood connection

Connecting via your home network

You require a router that has WPS functionality.

You require access to your router.If you do not have

this, follow the steps for "Direct connection".

When you begin, make sure that the extractor hood is

connected to the app or is on your home network.

1. Switch on the hob.

2. Touch and hold the t symbol for four seconds.

The product information is displayed.

3. Touch the t symbol repeatedly until ™ and ‚‡ are

displayed alternately.

‹ (not connected) or ƒ (connected to home

network) will be lit on the hotplate display.

4. Set the value ‚ in the settings area.

‚ flashes in the hotplate display.

5. If the appliance is not yet connected to your home

network, press the WPS button on the router within

the next 2 minutes.

The hob will be connected to your home network

and the value ƒ will appear on the hotplate display.

The process of connecting to the extractor hood

starts automatically and is active for 2 minutes.

If the appliance is already connected to your home

network, proceed to the next step.

6. Initiate the process for connecting to the extractor

hood.

Once the hob is connected to the extractor hood, the

value „ appears in the hotplate display. After you exit

the settings menu, the symbols for the hob-based hood

controls are displayed in the hob's control panel.

Note:

Connection can only be established when both

appliances are connected to your home network and

the connection process has been initiated for both of

them. If the connection process has already timed out

for one of the two appliances, try to connect again

(basic settings, ™‚‡ setting).

Disconnecting from the network

Di sconnect i ng from the net wor k

You can reset the connections you have saved for your

home network and extractor hood at any time.

1. Switch on the hob.

2. Touch and hold the t symbol for four seconds.

The product information is displayed.

3. Touch the t symbol repeatedly until ™ and‚‡ are

displayed alternately.

4. Set the ‹ value on the control panel.

The connection has been restored.

Control the hood via the hob

In the basic settings of your hob you can adjust the

behaviour of your extractor hood depending on the

switch-on/off of the hob or individual cooking zones.

~ "Hood control settings" on page 37

You can select other settings using the control panel.

Setting the fan

Activation

1. Touch the : symbol.

2. Select the fan setting.

You can choose between the levels 1, 2 and 3. To

select the levels Boost and PowerBoost, touch

buttons 4 or 5, or touch the á button repeatedly

until the required intensive level is set.

The fan has been activated.

Deactivating

1. Touch the : symbol.

2. Select fan setting 0.

The fan has been deactivated.

Setting automatic mode

Activation

Touch the : symbol until the > symbol appears on the

control panel.

The fan starts up automatically when steam is

produced.

Deactivating

Touch the : symbol until the > symbol goes out, or

select another fan level.

Automatic mode is deactivated.

Setting the hood lighting

You can switch the hood light on and off via the hob's

control panel.

Touch the < symbol.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PXX975DC1E Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PXX975DC1E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info