Bedienungsanleitung Bosch PXY875DE4E (Seite 14 von 44) (Englisch)

656958

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

en Flex Zone

|Flex Zone

Flex Zone

You can use the hob as a single hotplate or as two

independent hotplates, as required.

It consists of four inductors that work independently of

each other. If using the flexible cooking zone, only the

area that is covered by cookware is activated.

Advice on using cookware

To ensure that the cookware is detected and heat is

distributed evenly, correctly centre the cookware:

As two independent hotplates

The flexible cooking zone is used like two independent

hotplates.

Activating

See section ~ "Operating the appliance"

As a single hotplate

Using the entire cooking zone by connecting both

hotplates.

Linking the two hotplates

1. Set down the cookware. Select one of the two

hotplates assigned to the flexible cooking zone and

set the heat setting.

2. Touch the è symbol. The display lights up.

The heat setting appears in the display for the lower

hotplate.

The flexible cooking zone is activated.

Changing the heat setting

Select one of the two hotplates in the flexible cooking

zone and change the heat setting in the settings range.

Adding a new item of cookware

Set the new item of cookware down on the cooker,

select one of the two hotplates in the flexible cooking

zone and then touch the è symbol twice. The new item

of cookware will be detected and the heat setting that

was previously selected will be retained.

Note: If the cookware is moved to the hotplate being

used or lifted up, the hotplate begins an automatic

search and the heat setting selected previously is

retained.

Disconnecting the two hotplates

Select one of the two hotplates in the flexible cooking

zone and touch the è symbol.

This deactivates the flexible cooking zone. The two

hotplates will now function independently.

Notes

■ If the hotplate is switched off, and then switched

back on again later, the flexible cooking zone is

reset to function as two independent hotplates.

■ To change the configuration settings for the flexible

cooking zone, refer to section ~ "Basic settings".

As a single hotplate

Diameter smaller than or equal to 13 cm

Place the cookware on one of the four posi-

tions that can be seen in the illustration.

Diameter greater than 13 cm

Place the cookware on one of the three

positions that can be seen in the illustration.

If the cookware takes up more than one

hotplate, place it starting on the upper or

lower edge of the flexible cooking zone.

As two independent hotplates

The front and rear hotplates each have two induc-

tors and can be used independently of each other.

Select the required heat setting for each of the

hotplates. Use only one item of cookware on each

hotplate.

Recommendations

If the hob has more than one flexible

cooking zone, place the cookware on

top so that it covers only one of the flex-

ible cooking zones.

Otherwise, the hotplates will not be

activated as intended and the cooking

result will not be satisfactory.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PXY875DE4E Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PXY875DE4E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info