Bedienungsanleitung Bosch PXY875DE4E (Seite 25 von 44) (Englisch)

656958

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Cooking assist functions en

Connecting the wireless temperature sensor to the

control panel

You will need to connect the wireless temperature

sensor to the control panel before using the cooking

functions for the first time.

To connect the wireless temperature sensor to the

control panel, follow the instructions below:

1. Select the ™‚… menu; see the section on ~ "Basic

settings"

The hotplate indicator will light up.

2. Select the hotplate and its indicator will light up. A

signal will sound. The å indicator will light up.

3. Press the å symbol on the wireless temperature

sensor within 30 seconds.

After a few seconds, the status of the connection

between the temperature sensor and the control

panel will appear on the hotplate's display.

■ The cooking functions are made available once the

temperature sensor has been connected to the

control panel correctly.

■ If there is a fault with the temperature sensor, the

connection may not be established correctly for the

following reasons:

– Bluetooth communication error.

– You did not press the symbol on the temperature

sensor within 30 seconds of selecting a hotplate.

– The battery in the temperature sensor has run

out.

Reset the wireless temperature sensor and follow

the connection procedure once again.

■ If the temperature sensor and the control panel are

not connected correctly due to a transmission error,

follow the connection procedure once again.

If the display continues to show incorrect connection

‚, contact our technical after-sales service.

Resetting the wireless temperature sensor

1. Touch and hold the å symbol for approximately 8-

10 seconds.

While you are doing this, the temperature sensor's

LED indicator will light up three times. When the LED

lights up for the third time, it will start to reset the

temperature sensor. At this point, you will need to lift

your finger off the symbol.

Once the LED goes out, this means that the wireless

temperature sensor has been reset.

2. Repeat the connection procedure from point 2.

Setting procedure

1. Attach the temperature sensor to the saucepan; see

the section on ~ "Preparing and maintaining the

wireless temperature sensor"

2. Place a saucepan filled with sufficient liquid on the

required hotplate and always put the lid on.

3. Select the hotplate on which you have placed the

saucepan with the temperature sensor.

4. Touch the å symbol on the temperature sensor.

The indicator å will light up in the control panel.

5. Select the right temperature setting from the table.

The function has now been activated.

The temperature symbol å will flash until the water

or oil has reached the right temperature for adding

the food. A signal will sound and the temperature

symbol will stop flashing.

6. Once the signal has sounded, take the lid off and

add the food. Keep the lid on during cooking.

Note: Do not cover the pan when using the "Frying

with a large amount of oil in the saucepan" function.

Switching off cooking functions

Select the hotplate and set it to ‹ .‹ on the control

panel. The hotplate will switch off and the residual heat

indicator will appear.

Note: To re-activate the cooking functions, wait for

approximately 10 seconds.

Status

‹

Connected correctly

‚

Not connected correctly: Transmission error.

Not connected correctly: Temperature sensor fault.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PXY875DE4E Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PXY875DE4E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info