Bedienungsanleitung Bosch PXY875KW1E (Seite 13 von 60) (Englisch)

745999

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

en Operating the appliance

Cooking modes menu

The hob has a number of different cooking modes.

To access the cooking modes menu, touch menu in the

cooking zone's settings area.

Residual heat indicator

The hob has a residual heat indicator for each cooking

zone.If it is on, this means that the cooking zone in

question is still hot. Do not touch the cooking zone if its

field on the display is backlit in red.

When the cooking zone is switched off after cooking,

the residual heat indicator will light up. Even after the

hob has been switched off, the residual heat indicator

will remain lit for as long as the cooking zone remains

warm.

1Operating the appliance

Oper at i ng t he appl i anc e

This chapter explains how to set a hotplate. The table

shows heat settings and cooking times for various

meals.

First-time use

When you switch on the appliance for the first time, the

menu for implementing the initial settings appears in the

display panel.

The main screen is then displayed.

Note: You can change the language and any other

setting at any time. You can find further information on

selecting the language in section ~ "Basic settings".

Switching the hob on and off

Switch the hob on and off using the main switch.

To switch on: Touch the

# sensor. A signal sounds and

the touch display lights up. After a short switch-on time,

the hob will be ready for operation.

To switch off: Touch the # symbol until the indicator

beside the main switch goes out. The residual heat

indicator remains lit until the cooking zones have

cooled down sufficiently.

Notes

■ The hob automatically switches off if all cooking

zones have been switched off for more than

30 seconds.

■ The selected settings are stored for 10 minutes after

the hob has been switched off. If the hob is switched

back on within this time, the previous settings are

retained. Section ~ "Basic settings" contains

information about changing the time in which the

selected settings are saved.

Setting the cooking zone

Set the required power setting from 1 to 9.

Power setting 1 = lowest setting.

Power setting 9 = highest setting.

Each power setting has an intermediate level.

Notes

■ To protect the fragile parts of your appliance from

overheating and electrical overloading, the hob may

temporarily reduce the power.

■ In order to prevent the appliance from producing

excess noise, the hob may temporarily reduce the

power.

Cooking modes Function

“ Power levels

Allows you to select the heat setting for

the cooking zone.

% Assist

A preset list of dishes for frying and boil-

ing.

å Cooking functions

The wireless cooking sensor automati-

cally detects the temperature as cook-

ing progresses.

Note: This function will be ready to use

once the wireless cooking sensor is con-

nected to the control panel.

é Frying sensor

The hob automatically detects the tem-

perature as frying progresses.

· MoveMode

The temperature can be adjusted by

changing the position of the cookware

on the cooking zones.

Operating the appliance en

Selecting a hotplate and heat setting

The hob must be switched on.

1. Touch the symbol for the hotplate you require to

select the hotplate. The settings area for the hotplate

you have selected will appear on the display panel.

2. Swipe your finger over the settings area and touch

the heat setting you require.

The heat setting has now been set.

To return to the main screen, touch the symbol for the

active hotplate again.

Note: If there is no cookware on the active hotplate, the

selected heat setting will flash. After a certain period of

time, the hotplate will switch itself off.

To change the heat setting:

Select the hotplate and set the new heat setting in the

settings area.

Switching off the hotplate

Select the hotplate and set the heat setting to 0 in the

settings area. The hotplate will switch itself off and the

residual heat indicator will light up.

Rapid selection function

Use your finger to swipe right over the cooking zone in

order to set the heat setting to 9.0, or to swipe left to set

it to 0.0. Additional information on how to activate this

function can be found in the section entitled ~ "Basic

settings"

Chef's recommendations

Recommendations

■ When heating up puree, cream soups and thick

sauces, stir occasionally.

■ Set heat setting 8 to 9 for preheating.

■ When cooking with the lid on, turn the heat setting

down as soon as steam escapes between the lid

and the cookware. Steam does not need to escape

for a good cooking result.

■ After cooking, keep the lid on the cookware until you

serve the food.

■ To cook with the pressure cooker, observe the

manufacturer's instructions.

■ Do not cook food for too long, otherwise the

nutrients will be lost. The kitchen clock can be used

to set the optimum cooking time.

■ For a more healthy cooking result, smoking oil

should be avoided.

■ To brown food, fry small portions in succession.

■ Cookware may reach high temperatures while the

food is cooking. We recommend that you use oven

gloves.

■ You can find recommendations for energy-efficient

cooking in section ~ "Environmental protection"



PV

3RZHUOHYHO PHQX

Bosch PXY875KW1E Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PXY875KW1E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info