Bedienungsanleitung Bosch PXY875KW1E (Seite 49 von 60) (Englisch)

745999

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

en Hood connection

About data protection

When your appliance is connected for the first time to a

WLAN network, which is connected to the Internet, your

appliance transmits the following categories of data to

the Home Connect server (initial registration):

■ Unique appliance identification (consisting of

appliance codes as well as the MAC address of the

installed WiFi communication module).

■ Security certificate of the WiFi communication

module (to ensure a secure IT connection).

■ The current software and hardware version of your

domestic appliance.

■ Status of any previous resetting to factory settings.

This initial registration prepares the Home Connect

functions for use and is only required when you want to

use these Home Connect functions for the first time.

Note:

Ensure that the Home Connect functions can be used

only in conjunction with the Home Connect app.

Information on data protection can be accessed in the

Home Connect app.

Declaration of Conformity

Robert Bosch Hausgeräte GmbH hereby declares that

the appliance which features Home Connect is in

accordance with the basic requirements and the other

relevant provisions of the directive 2014/53/EU.

A detailed RED Declaration of Conformity can be found

online at www.bosch-home.com/de on the product

page for appliance in the additional documents.

2.4 GHz band: max. 100 mW

5 GHz band: max. 100 mW

eHood connection

Hood c onnect i on

You can connect this appliance to a suitable extractor

hood and then control the functions of the hood via your

hob.

You have various options for connecting the appliances

together:

Home Connect

Two appliances can be connected using the Home

Connect app provided that both of them are Home

Connect-compatible.

Both appliances can be controlled via the app and via

the control panel.

Refer to the Home Connect documents supplied and

the Home Connect section for more information.

~ "Home Connect" on page 43

Connecting appliances directly

If the appliance is connected directly to an extractor

hood, the extractor hood can be controlled via the hob.

It is then not possible for either of the appliances to

connect to your home network or to the app. Both

appliances can be controlled via the control panel.

BE BG CZ DK DE EE IE EL

ES FR HR IT CY LV LT LU

HU MT NL AT PL PT RO SI

SK FI SE UK NO CH TR

5 GHz Wi-Fi: for indoor use only

Hood connection en

Connecting appliances via your home network

Use this type of connection if neither or one of the two

appliances is connected to the Home Connect app.

If the appliances are connected to each other via your

home network, you can use both the hood controls and

Home Connect to operate the hob.

Notes

■ Make sure you follow the safety instructions in the

instruction manual for your extractor hood and that

these are complied with even when operating the

appliance via the hood controls on the

hob.~ "Important safety information" on page 6

■ If the appliance is being operated by means of the

controls on the extractor hood, this mode of

operation always has priority. It is not possible to use

the hood controls on the hob during this time.

■ In networked standby mode, your appliance requires

a maximum of 2 W.

Setting up

To set up the connection between the hob and the

extractor hood, the hob must be switched on.

Connecting directly

Make sure that the extractor hood is switched off.

For more information refer to the section entitled

"Connecting to the hob" in the instruction manual for

your extractor hood.

Note:

If you connect your hob directly to the extractor hood, it

cannot be connected to your home network as well and

you will not be able to use Home Connect.

1. Open the basic settings using the f touch key.

2. Touch the "Hood control" setting.

3. Touch "Direct connection".

4. You have 2 minutes to initiate the connection

process on the extractor hood.

A message will be displayed to notify you when the hob

is successfully connected to the extractor hood. The

symbols for the hood controls on the hob are displayed

in the settings area.

Connecting via your home network

You require a router that has WPS functionality.

Access to your router is required. If you do not have

this, follow the steps listed under "Direct connection".

When you begin, make sure that the extractor hood is

connected to the same home network.

1. Open the basic settings using the f touch key.

2. Touch the "Hood control" setting.

3. Touch "Connect to network".

4. Press the WPS button on the router within the next

2 minutes.

A message will be displayed to notify you when the

hob is successfully connected to your home

network.

5. You have 2 minutes to initiate the connection

process on the extractor hood.

A message will be displayed to notify you when the hob

is successfully connected to the extractor hood. The

symbols for the hood controls on the hob are displayed

in the settings area.

Note:

Connection can only be established when both

appliances are connected to your home network and

the connection process has been initiated for both of

them. If the time allowed for connecting has already

expired for one of the two appliances, initiate the

connection process again.

Disconnecting from the network

Di sc onnect i ng f r om t he net wor k

You can reset the connections you have saved for your

home network and extractor hood at any time.

1. Open the basic settings using the f touch key.

2. Touch the "Hood control" setting.

3. Touch "Disconnect".

The connection has been restored.

Bosch PXY875KW1E Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch PXY875KW1E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info